1. Prepare before experimentation
Remove reagents and samples and restore all reagents and samples to
room temperature.
2. Experimental steps
(1) Open the foil bag. Remove the test strip and place
horizontally.
(2) Add 10 μL of sample to the injection well of the test strip and
add 2 drops (~60 μL) of sample buffer.
(3) Normal temperature reaction. After 10-15 minutes, the test
results can be read. Results are invalid after 20 minutes.
(4) Concise operating procedures
Unpack, remove the test strip and place horizontally
↓
Add 10 μL of sample to the injection wells of the test strip
↓
Add 2 drops (~60 μL) of sample buffer to the sample wells
↓
React at room temperature for 10-15 minutes
Read the results with the naked eye.
Interpretation of test results
Negative,Positive,Invalid
Test result graph:
(1) Invalid result: If there is no visible red line or only test
Line (T line) but no quality control line (C line), the result is
invalid, which needs to be retested.
(2) Negative result: If there is only a red control line
(C-line), indicating that there is no antibody or antibody in the
sample
The antibody is below the detected level.
(3) Positive result: If there are two red lines (one red mass
control line and one red test line) or three red lines (one red
quality control line and two red test lines), the result is
positive.
Company profile
Zhongxiu Technology Co., Ltd. is a high-tech enterprise engaged in
the research and development, production and operation of in vitro
diagnostic products. The in vitro diagnostic products developed by
the company cover POCT series, microbial series, biochemical series
and immune series reagents and supporting instruments.
The company always adheres to the core concept of "fast and
accurate, not living up to life", is committed to providing
excellent products and services for the society, and contributes to
the cause of human health.
Zhongxiu Qualifications
DOC
White List