ADO ELECTRONICS LIMITED |
|
36W Square LED Slim Panel Light Surface Mounted 3 Years IP44 Dimmable
1. Description:
This new slim led panel light have 4 power range, they are 9w, 18w, 29w, and 36w. It is surface mounted, the fixture color could be white and black, material color is aluminum. Many customers like this new slim led panel light, it is because the new model design, and with high quality led chips and led drivers.
1. Modern Design: Clean lighting plain effect, Surface mounted
base, seamless stamping steel with black or white coating, High
Base with led driver inside
2. Modular design, customer can order lamp base according
installation situation
3. Edison Chip: Low decay rate of luminance, CCT: 3000K, 4000K
5000K and 6000K, CRI>80Ra warranty
4. LED Driver: Stable performance, isolated wide voltage IC
constant current led driver, 3 years warranty
2. Techical Data:
LED Power | 32w | Light Source | LED EDISON |
System Power | 36w | Driver | MEANWELL |
CRI | 80Ra / 90Ra | Voltage | 100-200V |
CCT | 3000K / 4000K / 6500K | Luminous | 3360LM |
Beam Angel | 120 Degree | Product Size | 350*60mm |
Life Hours | 50000hrs | Warranty | 2 Year |
3. Advantages:
1. Ultra thin, good heat, long life, low cost of maintenance
2. Scientifically-designed heat dissipater with much better cooling effect;
3. Energy-saving and environment-friendly Led Lamp
4. Stable and intelligent led driver
5. Installation: Surface Mounted / Recessed Mounted
6. Housing Color: White / Black / Sliver / Bronze / Chrome / Nickel
7. Instant on, no warm up time required.
8. Advanced super longlife and stable driver.
9. Eco-friendly. No mercury and harmful materials
10. Round and Square Type,OEM and ODM is welcome.
4. Application Places:
1. Home
2. Office
3. Hotel
4. Hospital
5. Cinema
6. Shop
5. Precautions:
The power must be turned off during installation. Do not install it
with electricity.
The product must be connected to a matching constant current drive
power source before it can be used normally. If the driver is
DC24V, please notice that the DC24V input of the constant current
drive power source must be connected with a power adapter and
cannot be directly connected to the mains. If the driver is
AC85-265V, then can be directly connected to the mains.
When selecting the power adapter, the power adapter power should
have a certain margin. The total power of the fixture divided by
0.8 is the output power of the power adapter to ensure the
long-term stability and life of the power adapter.
6. Why Choose Us: