Active Member
|
[China]
Address: Room 401, 4 Floor, No.12, Chebei Road, Dongsheng Industrial Zone, Tianhe District, Guangzhou, Guangdong Province, China
Contact name:Linda Zhang
ADO ELECTRONICS LIMITED |
|
|
5w 9w 12w 16w 22w led panel light aluminum 6000K Square recessed anti-glare
1. Specification:
| Power | 5W | 9W | 12W | 16W | 22W |
| Shape | Round | Round | Round | Round | Round |
| Ring diameter | ¢90mm | ¢120mm | ¢140mm | ¢170mm | ¢220mm |
| Hole size | Φ75mm | Φ105mm | Φ125mm | Φ155mm | Φ205mm |
Color Temperature | warm white 3000K neutral white 4000K cool white 6500K | ||||
| LED | SMD2835 | ||||
| LED QTY | 25LED | 45LED | 60LED | 80LED | 110LED |
| PCS/Carton | 50 PCS | 50 PCS | 20 PCS | 20 PCS | 20 PCS |
| Carton Size (cm) | 60*20*25.5 | 75*20*31.5 | 35.5*20*34 | 41.5*20*40.5 | 51.5*20*50.5 |
| CBM/ CTN | 0.0306 | 0.04725 | 0.02414 | 0.033615 | 0.052015 |
2. Technical Data Sheet:
| Input Voltage | AC85-265V |
| Luminous Flux | 80-90LM/W |
| Finish | White |
| Beam Angle | 120 degree |
| LED Brand | Epistar |
| LED Driver | Isolated IC Constant smart driver |
| IP Grade | IP20 |
| Material | Aluminum+PC |
| Shape | Square |
| Installation | Recessed Mounted |
| Lifespan | 50000hours |
| Certificate | CE RoHS |
| Warranty | 2 Years |
| Market | Europe. USA |
| Finish | White |
| Beam Angle | 120 degree |
| CRI | 80Ra |
3. Application:
1. Conference / meeting room
2. Hotels & Schools
3. Colleges & Universities
4. Commercial lighting
5. Residential / Institution Buildings
6. Plant growing lighting
7. Hospitals General lighting
4. How to Install the LED Panel Light
1. Make sure the power is off
2. To cut a hole in the ceiling, the hole size of the ceiling
should be the same as the lamp’s cut-out size
3. Connect the DC connectors with the lamp and the driver
4. Insert the two clips to the ceiling , make sure it is fastened
5. This product is limited to indoor use only
5. Quality Control:
1. 100% of the lamps will be tested and passed all QC procedures before shipping
2. Defective items will be compensated immediately or in next order.
3. 500 times on and off testing after production finished.
4. Raw material full check before production.
5. 48 hours aging test after good is finnnished
