Home Companies SZ ADE Electronics Co., Ltd

SN65176BDR Current Sense Resistors Sop-8 Rs-485/Rs-422 Ics Rohs

Contact Us

[China]

Trade Verify

Address: Room 405, Building A2, Niushang Zhigu, United Industrial Park, Fengtang Avenue, Shenzhen，Guangdong, China. Post code: 518100

Contact name:Amy

SZ ADE Electronics Co., Ltd

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

SN65176BDR Current Sense Resistors Sop-8 Rs-485/Rs-422 Ics Rohs

Country/Region	china
City & Province	shenzhen guangdong
Categories	Solar Chargers

Product Details

SN65176BDR Current Sense Resistors Sop-8 Rs-485/Rs-422 Ics Rohs

1/1 Transceiver Half RS422, RS485 8-SOP

Specifications of SN65176BDR

TYPE	DESCRIPTION
Category	Integrated Circuits (ICs)
	Interface
	Drivers, Receivers, Transceivers
Mfr	UMW
Series	-
Package	Tape & Reel (TR)
	Cut Tape (CT)
	Digi-Reel®
Product Status	Active
Type	Transceiver
Protocol	RS422, RS485
Number of Drivers/Receivers	1/1
Duplex	Half
Receiver Hysteresis	70 mV
Data Rate	-
Voltage - Supply	4.75V ~ 5.25V
Operating Temperature	-40°C ~ 105°C (TA)
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154", 3.90mm Width)
Supplier Device Package	8-SOP

Features of SN65176BDR

• Meets EIA Standard RS485 for Multipoint Bus Transmission and is Compatible with RS-422.

• Small Outline (SOIC) Package Option Available for Minimum Board Space.

•22 ns Driver Propagation Delays.

• Single +5V Supply.

•−7V to +12V Bus Common Mode Range Permits ±7V Ground Difference Between Devices on the Bus.

• Thermal Shutdown Protection.

• High Impedance to Bus with Driver in TRI STATE or with Power Off, Over the Entire Common Mode Range Allows the Unused Devices on the Bus to be Powered Down.

• Combined Impedance of a Driver Output and Receiver Input is Less Than One RS485 Unit Load, Allowing up to 32 Transceivers on the Bus.

• 70 mV Typical Receiver Hysteresis.

Applications of SN65176BDR

The SN75176B / SN65176B is a high speed differential TRI-STATE bus/line transceiver designed to meet the ® requirements of EIA standard RS485 with extended common mode range (+12V to −7V), for multipoint data transmission. In addition, it is compatible with

RS-422. The driver and receiver outputs feature TRI-STATE capability, for the driver outputs over the entire common mode range of +12V to −7V. Bus contention or fault situations that cause excessive power dissipation within the device are handled by a thermal shutdown circuit, which forces the driver outputs into the high impedance state. DC specifications are guaranteed over the 0 to 70°C temperature and 4.75V to 5.25V supply voltage range.

Environmental & Export Classifications of SN65176BDR