High Rigidity Aerosol Spray Paint Strong Adhesion 8min Dry High Extrusion Rate

400ML High Rigidity Aerosol Spray Paint Strong Adhesion 8min Dry 99% Rate MSDS Acrylic Heat Resistant Glass Spray Paint

Product Advantages:

1.100% acrylic resin

2. fast dry

3. be used in surface finishing and mending

4. interior-exterior use

5. Low chemical odor

6. Last for 2 years

Applications:

1. It is made from thermoplastic acrylic resin with advanced techniques.
2. It Can provide films with excellent weather resistance.
3. Spray paint has the features of good leveling, high coverage, fast dry, rich color and high luster, better flexibility, impact enduring, strong adhesiveness, and match well with many types of paint primers.
4. It can be widely used in surface finishing and mending of metal, wood, glass, leather, ceramics and plastics. The films should avoid contacting with gasoline or other solvents.

5. PACKING DETAILS
   ART NO.	CONTENT	CAN MATERIALS	CAN SIZE	CARTON SIZE	PACKING
   B0101	400ml/pc	Tinplate	65x158mm	275x205x205mm	12pcs/ctn
   B0102	300ml/pc	Tinplate	65x158mm	275x205x205mm	12pcs/ctn
   B0104	200ml/pc	Tinplate	52x130mm	645x328x188mm	72pcs/ctn

Delivery Time:

Within 30 days after the receipt of LC or TT deposit.

2. Spray Paint’s Pictures

3. Spray Paint's Features

a)  Excellent decorative effect with many of optional colors or customized colors;

b)  Excellent coverage and adhesion;

c)  Easy and quick spray and minimize loss;

d)  Fast drying (surface dry time: 10minutes);

e)  Excellent protection against rust, impact, UV etc;

f)  Glossy or matter finish.

PS: The following color card is for your reference and we could produce customized colors.

4. Usage for Spray Paint

a). Clean surface thoroughly, removing all dirt, grease, oil, wax, rust, moisture etc. Cover adjacent areas to protect from spray mist. Use at room temperature up 70°F.

b). Shake can vigorously for about 30 seconds before spraying.

c). On previously painted surface test spray in a small inconspicuous area.

d). Hold the can 15-25cm from the surface to be sprayed.

e). Press spray button firmly with steady even strokes while moving can rapidly back and forth.

f). 2 to 3 films with 20-30µm thick are better. Intermittence of 10 minutes between each film is recommended.

g). After use, turn can upside down and depress valve button for several seconds to clear valve until only gas emerges so as to prevent clogging.

5. Health & Safety Precautions

a) Keep in ventilated cool and dry places.

b) Do not clash, puncture, or incinerate the can.

c) Keep out of the reach of children.

d) If eye contact, immediately flush eye with plenty of clean water and seek medical advice.

e) If skin contact, flush skin with running water (and soap if available) and seek medical attention in the event of irritation.