12v 90ah 100ah Charging Sealed Lead Acid Battery Recycling For Camping

3. AGM Separator

Separator in VRLA bttey should consist of porous mass and adsorb massive electrolyte to make sure the free movement of electrolyte,

positive and negative ions.

AS the carier of electrolyte, separator also should prevent the short circuit between positive and negative plates.

Providing the shortest distance for negative and positive electrode, separator prevents lead paste to be damaged and dropped,

and prevents the contact between the cast and electrode even when the active material is off the plates.

Glass fiber as the normal and frequent choice, is characterized with strong adoabily, tiny aperture, high porosity, large pore area,

high mechanical strength, strong rsitance to acid crrorsiono and chemical oxidizing.

4. Safety valve

Synthesized with EPDM rubber and teflion;

The function of safety valve is to release gas when the internal pressure rises abnormally,

which can prevent water losses and protect battery from explosion by over-pressure and over-heat.

5. Over-pressure and over-heat

Battery case includes container and cover. 

Preventing impurities entering cells, cover also can avoid acid leakage and venting. Containing all materials relating charge and discharge,

ABS and PP material are chosen as battery case because of their well performance in insulativity, mechanical strength, anicororosion and

heat resistance.

6. Electrolyte

Electrolyte is compounded with sufuric acid, deionized water or distlled water.