Home Companies Shanghai Junbond Building Material CO.LTD

Bonding Windshield Polyurethane Sealant Adhesive Automobile

Active Member

Contact Us

[China]

Address: 802 Building 11 No.518 Xinzhuan Road,Xinqiao Town,Songjiang Dist,Shanghai,China

Contact name:Rita

Shanghai Junbond Building Material CO.LTD

Bonding Windshield Polyurethane Sealant Adhesive Automobile

Country/Region	china
City & Province	shanghai shanghai
Categories	Adhesives & Sealants

Product Details

OEM Packaging For Bonding Between Automobile Fitting Polyurethane Windshield Adhesive

Junbond^® JB-19 is a component, moisture curing polyurethane based adhesive for direct glazing in Automotive Glass Replacement.

Junbond^® JB-19 Windshield Polyurethane Sealant an isocyanate-free, high modulus,non conductive, thixotropic, single component modified polyurethane adhesive, which polymerizes rapidly under the effect of atmospheric moisture. It has been specially designed for bonding of fixed glass in automotive repair.

Application environment temperature 5~35℃, humidity 50~70%RH. When the temperature below 5℃, recommended place products in the environment of 30~40℃ for 1H (No more than 3H).

Application Areas:Suitable for assemble and reparation of windshield glass, back window glass and side window glass for automobiles.

Product Description

High Performing glass to metal

No sagging and high strength solution

Automotive wind shield fixing expert

Properties

- Suitable for applying to the opening of the windscreen made of any material, including aluminum;
- Due to its high initial hardness and exceptionally strong binding properties, no additional fixation of the glass is required;
- Very good resistance to sagging;
- Does not "reach" for the tool;
- High speed of polymerization;
- High shear strength and high shear modulus. Good elasticity even after long-term use;
- Very low electrical conductivity;
- Good adhesion to the residual materials of the old adhesive joint;
- High resistance to UV radiation;
- Excellent adhesion to glass, glass with a ceramic coating and to painted surfaces;

General information:

1	Brand Name	Junbond
2	Model	JB19
3	Main Material	Polyurethane
4	Type	One-component
5	Color	Black
6	Packaging Type	Carton
7	Carton	24 pieces/carton
8	Strength	High
9	Application Industry	Glass to metal
10	Certificate	ISO9001:2000, MSDS
11	Shelf life	9 -12 Months(4°C-40°C)
12	OEM/OEM	Available

Products Benefit:

a. Fast curing under room temperature, no sagging, solvent free

b. High bonding strength,

c. Good chemical and water resistance

d. No conductive

e. Excellent noise, vibration and impaction resistance

f. Automotive OEM quality

Technical data:

Items	Properties
Appearance	Black, homogeneous paste
Sagging properties(mm) GB/T 13477.6	0
Tack free time②(min) GB/T 13477.5	20, approx.
Curing speed(mm/d) HG/T 4363	3.2, approx.
Non-volatile contents ( %) GB/T 2793	95, approx.
Shore A-hardness GB/T 531.1	60, approx.
Tensile strength(MPa) GB/T 528	3.5, approx.
Elongation at break(%) GB/T 528	350, approx.
Tear strength( N/mm) GB/T 529	6.0, approx.
Tensile-shear strength(MPa)GB/T 7124	1.5, approx.
Operating temperature(℃)	-40~90

Transport and storage

Transport: Keep away the sealed product from moisture, the sun, high temperature and avoid collisions.
Storage: Keep sealed into cool, dry place.
Storage temperature: 5~25℃. Humidity: ≤50%RH.
9 months in the original cartridges and sausages,and 6monthes in the drum.
Hermetically store the products between 5 and 25ºC

Cautions

Keep away from children.
Avoid contacting with skin and eye. For skin contacted, remove the sealant by cloth, wash skin thoroughly with soap and water. For eye contacted, hold eyelids apart and flush thoroughly with water, contact physician.

Packing specification

310 ml cartridges and 400ml,600 ml sausages.

Color

Black

Application:

Operation:

Clean before operation

Clean and dry all surfaces by removing foreign matter and contaminants such as oil dust, grease,

frost, water, dirt, old sealants and any protective coating. Dust and loose particles should be cleaned.

Direction of operation

Tool:Manual or pneumatic plunger caulking gun

For cartridge

1. Cut nozzle to give the required angle and bead size
2.Pierce the membrane at the top of the cartridge and screw on the nozzle
3.Place the cartridge in an applicator gun and squeeze the trigger with equal strength

Junbom Hui Bei Factory

Package & Delivery

Certificate

Exhibition

FAQ

Q1. Do you have any MOQ for order?
A: Low MOQ, 3000pcs for order is availabl. And depend on your needs.

Q2. What about the lead time?

A:Sample needs 2-3 day, bulk production time around needs 1-2 weeks(the specific time depends on the number of orders.)

Q3. How do you ship the goods and how long does it take to arrive?
A: We usually ship by freight forwarding. It usually takes about 20---30 days to arrive. FCL and LCL, shipping can optional.

Q4. Can I get samples to test before bulk order ?
A: Yes, we welcome sample order to test and check quality.

Q5. How to proceed an order for polyurethane sealant?
A:Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.

If you want to know more details information, pls just feel free to contact us! :)