Home Companies ShenZhen Vector Technology Co., Ltd.

Three Phase 2.4Nm Servo Motor Driver With 24bit Absolute Encoder

Active Member

Contact Us

[China]

Address: Building 13, Maker Town, Liuxian Avenue, Nanshan District, Shenzhen

Contact name:Roc Chow

ShenZhen Vector Technology Co., Ltd.

Three Phase 2.4Nm Servo Motor Driver With 24bit Absolute Encoder

Country/Region	china
City & Province	shenzhen
Categories	Solar Chargers

Product Details

3000rpm 2.4Nm AC Servo Motor Driver Three Phase 220V With 24bit Absolute Encoder

Products Description

Product Name	AC Servo Motor Drive
Brand	Vector
Model No.	VEC-VC-00323HC-M-E
Power	0.75KW
Input/Output	Pulse/Analog
Voltage	220V
Phase	Three Phase
Rated Current	3A
Communication Protocols	Modbus
Encoder	24bit absolute encoder;

Installation Precautions
● Install the driver on a dry and sturdy platform. Maintain good ventilation and
heat dissipation during installation and maintain good grounding.
● Please install in the specified direction to avoid malfunction.

Installation Environment Requirements	Atmospheric Pressure	86~106kPa
	Mbient Humidity	0~55℃
	Ambient Temperature	0~90%RH
	IP Rating	IP20
	Vibration	0~4.9m/s^2

Maintenance and inspection Precautions
● do not change the wiring while the power is on, otherwise it may cause electric shock or injury.
● please perform wiring or inspection by professional technicians, otherwise it
may cause electric shock or product failure.
● please check the power after the power is off for at least 5 minutes. Even if the power is turned off,
high voltage may remain inside the servo drive. Therefore, do not touch the power terminal within 5 minutes
after the power is turned off, otherwise it may cause electric shock.
●when replacing the servo drive, please back up the servo driver user parameters to be replaced before the
replacement, and transfer the backup to the new servo drive, and then restart the operation, otherwise the
machine may be damaged.

Key Name	Key function
PAR/ALM	mode switch, return to the previous menu
▲(add)	increase flashing bit value of the LED digital tube
▼(dec)	Decrease flashing digit value of the LED digital tube
STOP/RST	Moves the blinking LED tube to the left; checks the high value of data longer than 5 bits; Fault reset;execute Fn function
RD/WT	read/write parameter values;enter fn page

Other Questions:
Q1. How to select the suitable model?
A: Please confirm your requirements for Rated Power, Current, Voltage,
Torque and select the suitable model based our model list;
Q2. How to set the programming system?
A: Our Servo drive support the Global Communication protocols: Modbus/CANopen/EtherCAT,
Please Just make the programming follow your experiences;

Certificates
1. CE (EU Safety Standard);
2. IEC/EN61800-5-1:2007 (Safety requirements for electrical, thermal and energy in Section 5-1 of the
variable speed electric driver system), corresponding to the national standard GB12668.501-2013;
3, IEC / EN61800-3: 2004 + A1 (speed control electric driver system part 3 electromagnetic compatibility
standards and its specific test methods), corresponding to the national standard GB12668.3-2012.

Quality Checking:
Four times Production testing
Two Times 24 hoursTesting
100% Inspection Before Shipping
Delivery Time and Shipping Way

1. For small order we always can delivery out within 1 week.
2. Our products can be shippied via Air, Land or Sea.