|
[China]
Trade Verify
Address: Waterfront industrial zone,Hengli Town,Dongguan City,Guangdong
Contact name:He
Dongguan Dezhijian Plastic Electronic Ltd |
|
Verified Suppliers
|
|
|
1kg 1.75mm pla filament recycling For voor 3d printer
Filament Introduction :
| Name | PLA |
| specification | 1.75mm 3.0mm |
| Net weight | 1.0kg |
| Gross weight | 1.3kg |
| Printing temperature | 200°C -240°C |
| Floor temperature | 100-120°C |
Product Description
3D printing filament PLA 1.75mm diameter is 1Kg (approx 2.2 lbs, not including the spool) net weight per spools.
Polyactic Acid (PLA) is biodegradable and made from materials such as corn starch, tapioca roots, and sugarcane. As one of the most popular 3D printing filaments now.
PLA is a multiple purpose material with high strength and minimal warping.PLA filament Extrusion Temperature Range: 190 Celsius degree – 230Celsius degree
Product Feature
1). Good toughness,High strength, High stiffness
2). No block nozzle, Good stick hot bed
3). Cost-effective can be processed in wide range temperature;
4). Low shrinkage, thermoforming dimensional stability
5). Accurate diameter: 3.0/1.75mm, variations + /-0.1mm,roundness
+/-0.05mm;
6). Suitable for a variety of 3D printer, Makerbot, UP, Cubify,
Leapfrog, Reprap, Ultimaker, Mendel, Prusa, Huxley etc.
Product Information
PLA Filament | |||
Filament Diameter: | 1.75/3.00mm | ||
Tolerance: | ±0.03mm | ||
Print Temp: | 190-210℃ | ||
Bed Temp: | Optional or 40-60℃ | ||
Print Speed: | 40-100mm/s | ||
Bed Setting: | Masking tap or temperature resistant heat tape | ||
Applicable Models | FDM-3D Printer | ||
Product Advantage
1. Material: Raw materials are all imported from the United State,
there’s absolutely no defective, recyled raw materials or in it.
2. Weight: The net weight of Consumables is 1kg, component fully.
3. Appearance: support custom.
4. Repeated Teat Results:Compared with ordinary low consumables on
the market, this material toughness stength, higther hardness,
printing support artfifacts more easily removed.
