Home Companies Foshan ABD Equipment Co., Ltd.

PP Horizontal Powder Coating Line Aluminium Powder Coating Plant CE

Contact Us

[China]

Trade Verify

Address: F5-2 ,North Fanhu District ,Leping Central Sanshui Foshan City ,Guangdong Province ,China

Contact name:Cindy

Foshan ABD Equipment Co., Ltd.

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

PP Horizontal Powder Coating Line Aluminium Powder Coating Plant CE

Country/Region	china
City & Province	foshan guangdong

Product Details

aluminum profile horizontal powder coating line manufacturer in China

Former Cases

Powder Coating Equipment

Semi-automatic Powder Coating line /Manual Powder Coating Line For Aluminum Profile

Usually, the powder coating line includes:

Pre treatment - Water Dry Off Oven - Powder Coating Booth - Cure Off Oven, Control Panels, Heating System, Lighting System, etc.

Different product have different design idea . This type manual powder line included pass type powder coating booth and top overhead rail support frame powder curing oven .It is transport products by overhead rail support frame.

Work process :

Loading the work piece on the overhead rail support go into the powder coating booth ,the worker coating the work piece , finished powder coating booth , move the work piece go into the oven directly to curing 20-30 mins . Finial , open the oven door , cooling 15 mins , pull the trolley and unloading product .

Advantage :

1. It has doors , when the worker powder coating , they can close the door , keep the work shop clean .

2.It is suitable for longer and thin work piece ,like aluminum profile and steel board etc

3. It only need 1-2 wokers to work .

4.High powder recovery efficiency .

5. When the worker move the work piece , only need move the overhead rail support .They can not touch the work piece surface . It is better for powder coating effect .

Manual /Semi-automatic powder coating line :

This model Semi-automatic /manual powder coating line include powder coating booth with overhead rail , overhead rail support frame , overhead rail support frame powder curing oven .

The work process :

1.Loading the work piece on the overhead rail of powder coating booth .

2.The worker coating the work piece at the inside of the powder coating booth .

3.Finished powder coating ,move the overhead rail support frame go into powder coating oven .

4.Push the overhead rail support frame go into the oven to heat about 20-30 mins (the time according the work piece need ) .

5. Cooling the work piece 15 pcs , unloading the work piece .

This design advantage :

1. It is suitable for longer products , look like aluminum profile ,light post,steel board etc .The length about 3-6ms .

2. It only need two worker to operate .

3.It can not miss every dead angle .

4.It can keep the work shop clean .

Pretreatment

Processes of the pretreatment:

Degreasing - water rinsing - water rinsing - Derusting - water rinsing - water rinsing - iron phosphating / zinc phosphating - chromium - ......

Stainless steel cabinet and tanks.

PP noozles;

Filters;

SUS304 stainless steel water tanks;

Water pump;

Pipe;

Other related parts.

Water dry off oven

Bridge Structure Oven

Bridge structure oven has advantage in the saving energy because of its structure. Heater will be kept in the upper of the oven, and the air curtain at the both end of the oven helps to prevent the heated air from escaping.

Floor- Mounted Structure Oven

Easier space especially height needed;

Adjustable opening sizes helps to prevent the heaters escaping as most as they can.

Various Heating Systems for options

Diesel, natural gas, LPG, Electric heating, and infrared catalytic heating are available.

Stainless steel heater exchanger and high temperature resistance fan & motor make sure the safe operations and long life of the equipment.

Powder Coating booth

Automatic Coating

Reciprocator carries automatic gun up and down action, with inverter control panel, the stroke and speed can adjust according to customer requests.

Manual Coating

manual coating stations are specially designed. And in this design, workers can check and recoat the profiles which may not be coated very perfectly by the reciprocators with guns.

Automatic coating + Manual Coating

This design can make sure all the work parts be coated perfectly and no missed.

Powder Recovery

Mono Cyclone Powder Recovery System

(manual powder coating line)

Feature:
Rate of Recovery:≥98%
Suitable for multi color, quick-color change .
Min 30mins could change one color.
Powder suppler center.
Suitable for automatic coating.
Automatic booth floor cleaning system.
PLC and touch screen control system. Support multiple languages.

Multi Cyclone Powder Recovery System

(manual powder coating line)

Feature:
Rate Of Recovery: ≥98%.
Suitable for single color coating.
Powder supply center and solid filter system.
Suitable for automatic coating.
Automatic booth floor cleaning system.
PLC and Touch screen control system. support multiple languages.

Movable Bag Type Powder Coating Booth

(manual powder coating line)

Rate of Recovery:≥96%
Suitable for multi color, quick-color change .
One color need one movable bag.
Min 40mins could change one color.
Powder suppler center.
Suitable for automatic coating.
Automatic booth floor cleaning system.
PLC and touch screen control system. Support multiple languages.

Packaging
Size	Various manual powder coating line
Containers needed	Engineers team will do the calculate jobs according to the confirmed designs.
Packaging Details	1. Plastic foam paper + hard papers covered to make sure the perfect conditions of the equipment during the delivery and shipping; 2. Every parts will be labeled with name, dimensions, number, etc for clients easier checks when receive the goods;

Assembles
Engineers oversea services are available.

Assemble drawings about manual powder coating line	1. Detailed 3D assemble drawings will be delivered before the equipment arriving clients' place. 2. Operation manuals and maintenance suggestions will be sent together with the equipment.