Active Member
|
[China]
Address: Room B813,No.61, Yejin Avenue, Qingshan District,Wuhan City, Hubei Province, China.
Contact name:Cocoon Lee
Wuhan Unique Mechanical And Electrical Equipment Co.,LTD. |
|
|
Fujikura 70s Fusion Splicer Kit With CT50 Cleaver Battery And Cord
The Fujikura 70S is the world’s fastest and most robust core alignment fusion splicer . Incorporating the proven ruggedized features pioneered by Fujikura, the 70S has added automated and enhanced user control features to increase splicing efficiency .
A user programmable, automated wind protector expedites the splicing process by automatically closing to initiate the splice process, and opening upon splice completion . Fully programmable “auto open sheath clamps” open one or both sheath clamps, after the tensile test, to prepare the fiber for removal . A new automated “clamshell design” tube heater applies heat to both sides of the splice protection sleeve resulting in a
14-second shrink time . The result is a total splice process time of approximately 21 seconds! Ruggedness and durability are greatly enhanced by a mirror-less optical system and "severe-impact resistant" monitor . Battery capacity is now 200 splices/shrinks .
An innovative transit case doubles as a built-in or mobile workstation and makes splicing easier than ever before .
Features
Automated and programmable wind protector
14-second automated tube heater
Fully ruggedized for shock, dust and moisture
Li-ion battery with 200 splices/shrinks per charge
5 mm cleave length for splice on connector or small package needs
Sheath clamp or fiber holder operation
On-board training and support videos
Internet software upgrades
Multi-function transit case with integrated workstation
Ordering Information
| DESCRIPTION | AFL NO. |
70S Fusion Splicer (machine only) Includes: ADC-18 AC Adapter, ACC-14 AC Cord, ELCT2-20A Spare Electrodes (pair), S70C Sheath Clamp, USB Cable, Alcohol Pot, Screw Driver, Splicer Carrying Strap, Quick Reference Guide, Video Instruction Manual and CC30 Transit Case with Carrying Strap | S015580 |
70S Fusion Splicer Kit (with cleaver) Includes: CT30A Cleaver, ADC-18 AC Adapter, ACC-14 AC Cord, ELCT2-20A Spare Electrodes (pair), S70C Sheath Clamp, USB Cable, Alcohol Dispenser, Screw Driver, Splicer Carrying Strap, Quick Reference Guide, Video Instruction Manual, and CC30 Transit Case with Carrying Strap | S015590 |
70S Fusion Splicer Kit (with cleaver, battery and cord) Includes: BTR-09 Battery, DCC-18 Battery Charge Cord, CT30A Cleaver, ADC-18 AC Adapter, ACC-14 AC Cord, ELCT2-20A Spare Electrodes (pair), S70C Sheath Clamp, USB Cable, Alcohol Dispenser, Screw Driver, Splicer Carrying Strap, Quick Reference Guide, Video Instruction Manual and CC30 Transit Case with Carrying Strap | S015591 |
| One Year Extended Warranty | S012996 |
| Two Year Extended Warranty | S013000 |
Recommended Accessories for the 70S
| DESCRIPTION | AFL NO. | DESCRIPTION | AFL NO. | |
| Cleavers | Batteries and Power Cords | |||
| CT-06A Cleaver | S015276 | ADC-18 AC Adapter | S015585 | |
| CT-30A Cleaver | S014080 | ACC-14 AC Power Cord | S014536 | |
| Fiber Holders | BTR-09 Battery | S015581 | ||
| FH-60-250 Fiber Holder (pair) | S014548 | DCC-18 Battery Charge Cord | S015582 | |
| FH-60-900 Fiber Holder (pair) | S014549 | DCC-12 Power Cord (connects AC Adapter to cigarette lighter socket) | S013552 | |
| FH-60-160 Fiber Holder (pair) | S014690 | |||
| FH-60-LT900 Fiber Holder (pair) | S015181 | DCC-13 Power Cord (connects AC Adapter to power source via alligator clips) | S013556 | |
| FH-60-LT900 Single Side Fiber Holder | S015275 | |||
| Miscellaneous | ||||
| FUSEConnect® Accessories | ||||
| ELCT2-20A Electrodes | S013532 | |||
| FH-FC-20 (900 µm within 2 .0 mm sheathing) (each) | S014696 | |||
| Portable Tripod Workstation (see product profile for more detail) | S014773 | |||
| FH-FC-30 (900 µm within 3 .0 mm sheathing) (pair) | S014695 | |||
| ASW-02 Splicing Workstation (see product profile for more detail) | S010532 | |||
| FH-FC-900 (900 µm cable) (each) | S014697 | |||
| JP-06 J-PLATE (70/19 Series) | S016100 | |||
| CLAMP-FC-2000 (pair) | S014705 | |||
| SL-01 Sleeve Loader | S015674 | |||
| CLAMP-FC-3000 (pair) | S014704 | |||
| Worktable Upper | S015779 | |||
| Sheath Clamps | ||||
| Worktable Lower | S015780 | |||
CLAMP-S70C Sheath Clamp (Coating diameter from 100 µm - 1000 µm (5-16 mm cleave)) | S015586 | |||
| Inner Box Set | S015979 | |||
| USB Cable | S014777 | |||
CLAMP-S70D Sheath Clamp (900 µm diameter loose tube fiber (5-16 mm cleave)) | S015862 | |||
| CC-30 Transit Case | S015587 | |||
Specifications
| PARAMETER | VALUE |
| Model | 70S Fusion Splicer |
| Applicable Fibers | Single-mode (G .652 & G .657), Multimode (G .651), DS (G .653), NZDS (G .655) |
| Cladding Diameter | 80 - 150 μm |
| Coating Diameter | 100 μm to 1,000 μm |
| Fiber Cleave Length | 5 to 16 mm |
| Typical Average Splice Loss | 0 .02 dB with SM, 0 .01 dB with MM, 0 .04 dB with DS, 0 .04 dB with NZDS, measured by cut-back method relevant to ITU-T standards |
| Splicing Time | SM FAST mode — 7 seconds; SM AUTO mode — 10 seconds; AUTO mode — 15 seconds with SM fiber |
| Arc Calibration Method | Automatic, real-time and by using results of previous splice when in AUTO mode, manual arc calibration function available |
| Splicing Modes | 100 preset and user programmable modes |
| Splice Loss Estimate | Based upon dual camera core axis alignment data |
| Storage of Splice Result | Last 2,000 results stored in the internal memory |
| Fiber Display | X or Y, or both X and Y simultaneously . Front or rear monitor display options with automated image orientation |
| Magnification | 320X for single X or Y view, or 200X for X and Y view |
| Viewing Method | Dual cameras with 4 .7 inch TFT color LCD monitor |
| Operating Condition | 0 to 5,000 m above sea level, 0 to 95%RH and -10 to 50°C respectively |
| Mechanical Proof Test | 1 .96 to 2 .25N |
| Tube Heater | Built-in tube heater with 30 heating modes; auto-start function |
| Tube Heating Time | Typical 14 seconds with FP-03 sleeve, 17 seconds with FP3 (40), 5-16 seconds with Fujikura micro sleeves |
| Protection Sleeve Length | 60 mm, 40 mm, micro |
| Splice/Heat Cycles with Battery | Typical 200 cycles with power save functions activated |
| Electrode Life | 3,000 Arc Discharges |
| Power Supply | Auto voltage selection from 100 to 240 V AC or 10 to 15 V DC with ADC-18, 14 .8 V DC with BTR-09 battery |
| Terminals | USB 1 .1 (USB-B type) for PC communication . Mini-DIN (6-pin) for HJS-02/03 |
| Wind Protection | Maximum wind velocity of 15 m/s . (34 mph) |
| Dimensions | 146 W x 159 D x 150 H (mm) / 5 .75 W x 6 .25 D x 5 .9 H (inches) |
| Weight | 2 .5 kg (5 .5 lbs) with AC adapter ADC-18; 2 .7 kg (5 .95 lbs) with BTR-09 battery |
