Home Companies Wuhan Unique Mechanical And Electrical Equipment Co.,LTD.

F200N Tensile Multimode Fiber Pigtail , High Return Loss LC Fiber Pigtail

Active Member

Contact Us

[China]

Address: Room B813,No.61, Yejin Avenue, Qingshan District,Wuhan City, Hubei Province, China.

Contact name:Cocoon Lee

Wuhan Unique Mechanical And Electrical Equipment Co.,LTD.

F200N Tensile Multimode Fiber Pigtail , High Return Loss LC Fiber Pigtail

Country/Region	china
City & Province	wuhan hubei

Product Details

Indoor Pigtail Terminated Fiber Optic Patch Cable Low Insertion Loss Multimode

Features

Low insertion loss, high return loss; High environmental stability; Available fiber cable diameters: Φ0.9, Φ2.0, Φ3.0mm; Simplex, duplex or multi-fiber Pigtail Types: Bundle, Ribbon, Waterproof; Armored Connector Types: LC, FC, SC, ST, MU, MTRJ, E2000, MPO, MTP Fiber cores: Simplex, Duplex, 4 fibers, 6 fibers, 8 fibers, 12 fibers, 24fibers, 48fibers etc. Fiber Mode: Singlemode (G.652), Multimode (OM1/OM2/OM3/OM4) Compliant to IEC, TIA/EIA, NTT and JIS specifications

Advantages

Lower labor costs

Installers working with single mode fiber typically have a fusion splicer machine. With a fusion splicer, you just splice the pigtail right onto the fiber cable in a minute or less

Factory guaranteed high quality

The factory-terminated pigtails are made in a controlled environment (the factory) and high quality polishing machines. The factory promises low insertion loss, high return loss (low reflection).

Each pigtail is labeled with factory-tested insertion loss and return loss. Also a serial number that you can trace to the factory measurements.

APPLICATIONS

A fiber pigtail is a single, short, usually tight-buffered fiber optic cable with a factory-installed connector on one end, and un-terminated fiber on the other end.

Fiber optic pigtails are used to terminated fiber optic cables via fusion splicing or mechanical splicing as shown in the picture below.

The end of the pigtail is stripped and fusion spliced to a single fiber or a multi-fiber trunk. Splicing of pigtails to each fiber in the trunk "breaks out" the multi-fiber cable into its component fibers for connection to the end equipment.

High quality fiber pigtails combined with correct fusion splicing practices offer the best performance for fiber optic cable termination.

99% of single mode applications use pigtails, but pigtails are also used in many multimode applications.

Specifications

Type	Single-mode			Multimode
Patch cord Type	MU Fiber Optic pigtail
Polishing Type	PC	UPC	APC	PC
Insertion Loss (dB)	≤0.2			≤0.25
Return Loss (dB)	≥45	≥50	≥60	N/A
Repeatability (dB)	IL≤0.2 RL≤5			IL≤0.1
Vibration (dB)	IL≤0.2 dB RL≤5dB			IL≤0.2 dB
Exchangeability (dB)	IL≤0.2 dB RL≤5dB			IL≤0.2 dB
Tensile Strength	F200N
Durability	n=1000
Operation Temperature (℃)	-40℃ ～+80℃
Ferrule Material	Zirconia Ceramic
Cable Diameter (mm)	Ø0.9, Ø2.0, Ø3.0