Unmanaged Intelligent PoE Switch 16 Port 2 Gigabit Electrical /
Optical Port
Product Description
CX-S1604GF fiber optic switch is an unmanaged
intelligent PoE switch, with 16 100M electrical ports + 2 Gigabit
uplink electrical ports + 2 Gigabit uplink optical ports, of which
1-16 ports support IEEE 802.3af/at Standard PoE power supply,
single-port PoE power up to 30W, and the PoE port can automatically
detect and identify powered devices that comply with the IEEE
802.3af/at standard and supply power to them through network
cables. Non-POE devices intelligently detect and only transmit data
without power supply.
It can supply power to PoE terminal devices such as IP
phones, network cameras, wireless APs, video intercoms, and smart
homes through network cables. It is suitable for hotels, schools,
factory dormitories, and small and medium-sized enterprises to
build cost-effective networks..
PoE technology (Power over Ethernet) is Power over
Ethernet technology, which refers to providing DC power supply for
some IP-based terminals (such as IP phones, wireless access APs,
network cameras, etc.) while transmitting data signals. technology,
these devices that receive DC power are called powered devices
Features
- 16 100M PoE ports + 2 Gigabit uplink network ports + 2 Gigabit
uplink optical ports
- Comply with IEEE 802.3, IEEE 802.3u, IEEE802.3x standards
- Ethernet port supports 10/100M adaptive
- Flow control mode: Full duplex adopts IEEE 802.3x standard, half
duplex adopts Back pressure standard
- Store-and-forward switching mechanism
- Comply with IEEE 802.3af/at PoE power supply standard
- Three-speed intelligent dial switch (switch function can be
customized):
VLAN: port isolation mode, 1-16 ports realize
monitoring network downlink ports are isolated from each other, and
communicate with uplink ports, effectively suppressing broadcast
storms, Protect intranet security.
PoE forced power supply: Ports 13~16 become forced
power supply mode, the power of a single port can reach 30W, and
when the power of a single port exceeds 30W, the power supply of
the port will be automatically cut off, and the power supply will
be restored automatically after the port overload is removed.
- AI watchdog: PoE watchdog mode, 1-16 power supply ports support PoE
watchdog function, when the port communication fails, the
corresponding port PoE It will restart automatically, reducing
on-site maintenance costs.
- The PoE port supports a priority mechanism. When the remaining
power is insufficient, the power supply of the high-priority port
is given priority to avoid overloading of the device.
- Ports 1~16 support AI to identify long distances. When the network
cable length is less than 100 meters, the default rate is 100M.
When the network cable length is greater than 100 meters, the
corresponding port The rate is automatically reduced to 10M, and
the PoE power supply and data transmission distance can be extended
to 250 meters.
Specification
Technical Parameters |
port characteristics |
fixed port | 16 10/100Base-TX POE ports (Data/Power) 2 10/100Base-TX uplink RJ45 ports (Data) 2 1000Base-X SFP optical port slots (Data) |
Network port characteristics | 1-16 ports 10/100BaseT (X) automatic detection, full/half duplex
MDI/MDI-X adaptive |
Network protocol | IEEE802.3 IEEE802.3u IEEE802.3x |
Backplane Bandwidth | 11.2 Gbps |
packet forwarding rate | 8.332Mpps |
packet forwarding cache | 2M |
MAC address table | 2K |
forwarding mode | store and forward |
Twisted pair transmission | 10BASE-T : Cat3,4,5 UTP(≤250 meter) 100BASE-TX : Cat5 or later UTP(≤100 meter) |
LED indicator | Running indicator: Sys (green); Network indicator: Link (green) |
Special feature |
Function switch (customizable) | SW1: VLAN |
SW2: Force Output |
SW3: Watchdog |
PoE and Power Characteristics |
PoE power supply standard | 1-16 ports support IEEE802.3af/at standard PoE power supply |
PoE power supply pin | 1/2(+),3/6(-) |
PoE maximum single port/average power | AT-30W / AF-15.4W |
total power | 200W |
Overall power consumption | Standby power consumption: <6W; full load power consumption:
<200W |
Details Images
![](http://img.everychina.com/nimg/94/c8/e09d61cb1fe7a10d97e95d9407e6.jpg)
![](http://img.everychina.com/nimg/88/fd/f2b12d3d85a8b3dc700c320edb65.jpg)
![](http://img.everychina.com/nimg/49/87/e3384848e3e58c4449c908994b13.jpg)
![](http://img.everychina.com/nimg/fd/29/10c81c07fd0046a725ef74bfcb0b.jpg)
![](http://img.everychina.com/nimg/ab/c8/fad2518a141025bffeb2f1bc0679.jpg)
FAQ
Q1. Can I have a sample order?
A: Yes, we welcome sample order to test and check quality. Mixed
samples are acceptable.
Q2. What about the lead time?
A: Sample needs 1-3 working days, mass production time needs 3-5
weeks based on order quantity.
Q3. Do you have any MOQ limit?
A: Low MOQ, 1pc for sample checking is available.
Q4. Do your products meet our standards?
A: Yes, almost all our products have CE,ROHS,FCC,etc.
Q5. How to proceed an order?
A: Firstly let us know your requirements or application. Secondly
We quote according to your requirements or our suggestions.Thirdly
customer confirms the samples and places deposit for formal order.
Then we arrange the production.
Q6. How do you ship the goods and how long does it take to arrive?
A: We usually ship by Ali-Logistics, DHL, UPS, Fedex, TNT, EMS, SF
Express or your designated forwarder. It usually takes 3-7 days to arrive. Airline and sea shipping also
optional.
Q7. What is your payment term?
We have Ali- pay, T/T, Visa,Western Union payment terms options, you can choose the one which
is convenient or effective for you !
Q8. Can you customized logo and packaging?
A: Yes, OEM/ODM are acceptable. Our design team will help you
design as your requirement.