- Earloop Welding Ultrasonic Face Mask Making Machine With
Intelligent Computer
Product features
1. Automatically.
2. Advanced ultrasonic welding technology:
3. Stable performance and low failure rate
4. Low noise and small floor area
5. Aluminum alloy structure, no rust, long service life
Equipment characteristics
- The machine adopts aluminum alloy structure, small size, stable
operation and low scrap rate;
- With photoelectric detection, automatic counting, can control the
production speed and high output;
- It can produce about 100 pieces per minute, and can produce (3-6
layers) multi-layer masks.
- You can adjust the size of the mask blank and the folding location.
- The whole line include face mask blank making machine and outside
earloop welding machine
Equipment Features
- Automatic tension control of raw materials to ensure the balance of
tension of raw materials;
- Photoelectric detection of raw materials to reduce the waste of
materials, plus voice-activated alarm and stop;
- The equipment is enabled total quantity counting and single-stack
counting, which is convenient for the post-process connecting to
the sterilization packing line;
- Modular/humanized design for easy maintenance;
- The whole machine is made of aluminum alloy, sheet metal and
chrome-plated steel. It is good-looking, durable and anti-rust,
causing no pollute to the environment.
- Full servo action is adopted in the ear-loop welding to achieve
energy-saving and high-speed;
- The entire production line requires two operators, one is
responsible for the operation of the machine and the replacement of
the raw material rolls; another is responsible for collecting the
finished product mask and arranging the boxes in an orderly manner;
the person supervising the machine can take care of multiple
machines at the same time.
Raw materials for manufacturing face mask:
1 | Two layers of PP non-woven composite fiber (about 30g). |
2 | The middle layer is meltblown cloth (about 25g). |
3 | Nose bridge strip PP3 mm. |
4 | Earband is round with a diameter of 2.5-m. |
Product parameters
Model | LR type |
Maximum width of bag-making machine | 500mm |
maximal length | 1200mm |
Production speed | 180-200 piece/min |
Main motor power | 1.1kw |
Electric heating power | 2kw |
Voltage | 220v/50hz |
machine weight | 700kg |
Dimension | 3600*1300*1700mm |
The thickness of the apron | 0.01-0.08mm |
- Equipment installation and configuration requirements
- Equipment size: 4200mm (L) x 1100mm (W) x 2200mm (H);
- Equipment weight: 1600 KG
- Working voltage: AC220V, 50 / 60HZ, rated power: 4KW
- Compressed air: 0.5-0.7Mpa
- Use environment: temperature 10-35 ℃, humidity 5-35% HR, no
flammability, corrosive gas, no dust (cleanness not less than
100,000)