|
[China]
Trade Verify
Address: Room 609,East Tower of Xiyuan International Plaza,Jianshe Road,Zhengzhou,China
Contact name:li
Jiaozuo Zhongxin Heavy Industrial Machinery Co.,Ltd |
|
Verified Suppliers
|
|
|
product description
PXH series gyratory crusher integrates mechanical, hydraulic, electrical, automation and intelligent control technologies, and is an intelligent coarse crushing equipment.
The gyratory crusher is mainly composed of the beam part, the upper, middle and lower frame parts, the moving cone part, the eccentric sleeve part, the transmission part and the hydraulic cylinder part. The eccentric sleeve drives the moving cone to swing in a circle, so as to continuously squeeze and crush the stones.
By adjusting the hydraulic cylinder at the bottom of the moving cone, the moving cone can move up and down to easily adjust the size of the discharge port and the particle size of the product. At the same time, the hydraulic cylinder also provides iron protection function. When an unbreakable object (such as iron block) enters the crushing cavity, the hydraulic cylinder can automatically drop the moving cone, thereby releasing the iron block and continuing to crush.
Product advantages
1. The crushing chamber can be suitable for various crushing application conditions and has good crushing performance.
2. Manganese steel wear parts are standard parts, and chrome alloy fixed cone lining plate and lower frame lining plate are optional parts.
3. The dust-proof seal is equipped with a positive pressure blower to prevent dust from entering the eccentric device and the drive device and prolong the life of the crusher bearing.
4. Balanced design is the design of mobile or fixed crushing operation, so that the impact force transmitted to the support frame of the crusher is small.
5. Beam bushings and seals can be easily replaced without removing the beam, which reduces manpower, time and equipment consumption and yield loss caused by downtime.
Specification
| Model | Weight | Beam assembly | Upper frame assembly | Main shaft assembly | Lower frame assembly | Spindle position control assembly | Eccentric assembly | |
42-65 |
kg pounds |
119,750 264,000 |
20,500 45,200 |
80,100 36,330 |
23,130 51,000 |
29,570 65,200 |
4,040 8,900 |
3,080 6,800 |
50-65 |
kg pounds |
153,300 338,000 |
30,840 68,000 |
54,880 121,000 |
28,120 62,000 |
29,570 65,200 |
4,040 8,900 |
3,080 6,800 |
54-75 |
kg pounds |
242,220 534,000 |
38,100 84,000 |
85,050 187,500 |
38,560 85,000 |
62,140 137,000 |
5,400 11,900 |
5,720 12,600 |
62-75 |
kg pounds |
298,460 658,000 |
69,850 154,000 |
109,320 241,000 |
42,180 93,000 |
62,240 137,200 |
5,400 11,900 |
5,720 12,600 |
60-89 |
kg pounds |
398,250 878,000 |
65,320 144,000 |
154,680 341,000 |
66,220 146,000 |
82,780 182,500 |
10,430 23,000 |
8,940 19,700 |
60-110E |
kg pounds |
553,383 1,220,000 |
103,964 229,200 |
169,010 372,600 |
103,874 229,000 |
114,986 253,500 |
21,275 46,900 |
17,900 39,460 |
