1.5kw / 3kw Portable Steel Bar Bending Machine For High Rise Buildings

Product composition:
1. Ultra-high pressure electric oil pump.
2. Portable hydraulic steel bar bending machine (straightening machine)
3. Two 5-meter-long 70Mpa high-pressure oil pipes are standard.
Product Description:
1. Remove the package and check whether the appearance of the machine is intact.
2. Fill the electric oil pump with hydraulic oil. In winter, it is recommended to add No. 32 anti-wear hydraulic oil, and in other seasons, it is recommended to add No. 46 anti-wear hydraulic oil. The amount of oil can be filled to the upper middle of the scale next to the mailbox. (0.75KW motor adds about 16 liters. 1.5KW motor adds about 30 liters)
3. Ask a professional electrician to connect the power supply (380V), and pay attention to the direction of the motor running clockwise. 4. Connect the high-pressure oil pipe, 2 joints of the bending machine, and 2 joints of the electric oil pump.
5. Regarding the description of the manual reversing valve, the manual reversing valve has a total of 3 gears, which are A (the leftmost position-forward or backward) O (middle position-stop) B (the rightmost position-forward or backward), please observe carefully. Special reminder, before starting the motor, the manual reversing valve should be turned to O (stop 6. Start the motor, turn the reversing valve left and right, let the bending machine piston run 3 times back and forth, and drain the air in the bending machine oil cylinder.
7. Before the bending machine works, the safety cover must be covered. If there is no cover, please ignore it before continuing to operate.

Technical parameter of Steel Bar Upsetting Machine

Advantages of Portable Steel Bar Bending Machine

(1) The overall structure is simple and easy to operate. Good stability, high reliability, ensure the quality of steel bending, improve work efficiency:
(2) It is suitable for on-site operations such as parts that are difficult for ordinary bending machines to reach after steel bar binding or retarded concrete pouring;
(3) Driven by an ultra-high pressure hydraulic system, the bending force is large, and the maximum bending force is 40MM;
(4) The machine does not need to replace the working head and can bend and straighten steel bars. Bending, straightening fast;
(5) The machine is easy to operate, labor-saving, and easy to move. A portable steel bar bending machine straightening machine is especially suitable for mobile operations in steel bar processing workshops or construction sites.

Application of Portable Steel Bar Bending Machine

Portable steel bar bending is widely used in high-rise buildings, highways, railway foundation steel cages, and steel bars in various building skeletons. It is suitable for on-site bending construction of pile foundation steel bars and pile head steel bars.