Shaanxi Zhongtuo Mine Equipment Co.,Ltd |
Verified Suppliers
|
|
High Pressure Injection Grout Pump Concrete Delivery Machine
Introduction of Injection Grout Pump Concrete Delivery Machine
A concrete delivery pump, also known as a concrete pump, consists of a pump body and delivery pipe. It is a machine that uses pressure to transport concrete along the pipeline continuously. It is mainly used in housing construction, bridge, and tunnel construction, mainly divided into gate valve concrete pump and S valve concrete pump. The other is to install the pump body on the chassis of the car, and then equip it with a retractable or inflection boom to form a pump truck.
Technical Parameter of Concrete Delivery Pump
Model | ZT5.0 |
Productive Forces | 5m3/h |
Pressure | 10Mpa |
Power | 15kw |
Aggregate Size | 0.5-1.5cm |
Pipe Diameter | Φ65-80mm |
Max Convey Distance | 40m,20m |
Size | 1800*700*1200mm |
Weight | 600kg |
Features of High-pressure Cement Grouting Pump
1. Adopt full hydraulic design, the system hydraulic pressure is
safe and reliable, and the complicated electrical control system is
reduced. The failure rate is greatly reduced, and the system runs
stably.
2. It has the function of an anti-pump, which is beneficial to
eliminate the blockage fault in time.
3. Adopt an advanced s-pipe distribution valve, which can
automatically compensate for the wear gap, and has good sealing
performance.
4. Wear-resistant alloy glass and cutting ring for long service
life.
5. The hydraulic pipes are optimized by American experts, and the
unique air-cooled and water-cooled design can effectively control
the temperature and prolong the service life of hydraulic
components.
6. Centralized lubrication system to ensure effective lubrication
during machine operation.
7. The humanized design of the product makes the operation more
convenient and maintenance easier.
Operating Specifications of Injection Grouting Pump
1. The towed concrete pump can be towed by motor vehicles, but
shall not carry any cargo, and the towing speed shall not exceed
8km/h;
2. The pressure of the concrete grouting pump and each safety valve
of the hydraulic system shall meet the requirements of the manual,
and the user shall not adjust or change it;
3. Antifreeze measures should be taken for the construction of
concrete transfer pumps in cold seasons;
4. During construction in hot seasons, the concrete pump should
prevent the oil temperature from being too high. When the
temperature reaches 70℃, stop the operation or take other measures
to cool down;
5. After pumping concrete, clean the hopper, S valve, concrete
cylinder, and conveying pipeline in time. After the pump is
cleaned, the pressure of the accumulator should be released, the
power supply should be cut off, and the switches should be in the
stop or disconnected position;
6. Staff are not allowed to climb or ride on the pipeline, and
should absolutely avoid it when working at heights;
Concrete Pump Applications
1. Pumping wet-mixed mortar for high buildings and secondary structure construction.
2. KS series concrete pump is widely used for secondary construction filling, reinforcement grouting, fullback grouting, and bolt supporting in floor heating engineering, roofing, high-rise building walls, reservoirs, hydropower stations, ports, docks, foundation treatment, soft foundation, tunnels, subways, mining construction, etc.
Entire Service
We would provide customers with a one-year warranty, during processing, if customers have any problems with installation and use, we have professionals to provide online text, voice, or video communication services for them.