|
[China]
Trade Verify
Address: Room 1806, Block B, Haiyi International Building, Fengcheng 5th Road, Weiyang District, Xi'an City, Shaanxi Province
Contact name:Summer
Shaanxi Zhongtuo Mine Equipment Co.,Ltd |
|
Verified Suppliers
|
|
|
1, small models, flexible operation
2, chisel hair is made of high-quality tungsten steel alloy
3, life of more than 3000m2, per hour hammering area by different
concrete strengths up to 30-100 square meters
4, adhere to continuous improvement to meet customer needs
handheld scrabbler: for the concrete
bridge deck chisel, column chisel hair, the use of pump power,
impact, and the depth of up to 10mm above the chisel density can
reach 100%.
Application of Handheld Electric Concrete Scrabbler:
Mainly applicable to reservoir, dam leakage, dangerous bridge
reinforcement, power plants, highways, high-speed railway, tunnel
letters, and other building reinforcement and concrete chisel
projects. Scrabbler - Single Head On a variety of old ground to do
before the renovation of the floor treatment; remove damaged ground
raised part; epoxy floor chisel; ground to do anti-slip surface; a
new layer of playing hair with high efficiency and high efficiency,
scrabbler can make your construction Quality has an unprecedented
effect.
Technical Parameters of Handheld Electric Concrete Scrabbler:
| Product Name: | Electric Scrabbler | |
| Power | 1300 | w |
| Voltage | 220 | v |
| Max.Speed | 1300 | r |
| Disc Diameter | 120 | mm |
| Scrabbler depth | 3-8 | mm |
| Weight | 7.5 | kg |
Use of Handheld Electric Concrete Scrabbler:
The hand-held double-head chisel is mainly used in the fields of
expressways, railway bridge decks, and box girder concrete surface
removal, building a wall, ground, and municipal engineering
concrete surface removal, repair, renovation, and reinforcement. It
not only improves work efficiency and quality but also makes the
working surface achieve uniform roughness.
Notes of Handheld Electric Concrete Scrabbler:
1. If conditions permit, you can bring personal protective
equipment including safety goggles, safety shoes, ear protection,
and gloves.
2. Make sure that the air duct and the joint are well connected,
and the air pressure must meet the requirements.
3. Do not use solvents such as gasoline to clear the device.
4. Do not use it in a potentially explosive environment
