|
[China]
Trade Verify
Address: Room 1806, Block B, Haiyi International Building, Fengcheng 5th Road, Weiyang District, Xi'an City, Shaanxi Province
Contact name:Summer
Shaanxi Zhongtuo Mine Equipment Co.,Ltd |
|
Verified Suppliers
|
|
|
The Latest One-meter Double-disc Concrete Ride-on Trowel
Description of Concrete Trowel Seat-Driven Machine
The controller can be connected to a humidity detection device.
When it is detected that the humidity of the wall is lower than the
rated value, the water spray pipe automatically sprays water. When
the humidity of the wall is detected to be higher than the rated
value, the air jet port automatically sprays water. There is a
one-way valve, and a stop valve can be set on the spray pipe.
The wall-troweling machine includes a cover, a disc, a casing, a
motor, a blocking block, and a blade. The disc is the main part, a
blocking block is arranged on the upper surface of the disc, and a
cutter is arranged upward on the disc. The disc is clamped with the
cutter, the blade is movably connected to form the cutter, the
cutter is connected upward with a motor, the motor and the cutter
are connected through a transmission shaft, and the motor is
provided with a casing outward, which is characterized by a water
pump control handle, a water pump switch, an atomizing nozzle, a
mist Chemical nozzle, hose, water pump, kettle, motor controller,
motor control handle and lithium battery, the motor is AC and DC
dual-purpose motor, the outer casing is made of insulating
material, and the inner casing is provided with a lithium battery.
Parameter of Concrete Trowel Seat-Driven Machine
| Model | ZT80L | ZT100L |
| Engine type | Honda | Honda |
| Power | 9.6(13.0)kW/hp | 17.6(24.0)kW/hp |
Blade/Power | 70-150/3600rpm | 70-150/3600rpm |
working diameter | 1910*1030mm | 1910*1030 |
Disc diameter | 800mm | 100mm |
| Blade size | 1260*150mm | 350*150 |
| Weight | 260kg | 386kg |
The Working Principle of Concrete Trowel Seat-Driven Machine
Ride-on double disc gasoline trowel, this ride-on trowel is easy to
operate, and the efficiency can reach 400-500m² in one hour. The
grinding disc is used for rough grinding on the ground, and the
sharpening knife is used for fine grinding on the ground. The
working width is 2 meters. It is simple and easy to operate. One
car trowel can reach ten hand-held trowels. There is no problem
with working efficiency. , This double-disc ride-on trowel is
mainly used for slurrying, compacting, smoothing, and polishing
concrete floors.
The first is to confirm that the main gate switch is closed. When
the ride-on trowel starts, do not step on the accelerator. You can
start by pulling the damper. After the ride-on trowel starts,
return the damper to its original position. The left foot cannot
step on the flameout switch. Generally, it is stepped on during an
emergency stop, pay attention to the first ignition, and the time
for the oil pump to pump oil is about 10 seconds.
The gear must be changed when the machine is off. If the gear
cannot be engaged, turn the clutch wheel by hand, and then try
again. When the machine is running, the accelerator must be
completely released. If the gear cannot be engaged, step on the
accelerator and then Release it, wait for the idle speed to return
to the original position, and try again.
Special attention needs to be paid to turning on the ride-on
trowel, and you need to hold the joystick tightly to keep the
fuselage balanced. When the ride-on trowel is working, you must
hold the ride-on trowel firmly, and it should be done in a time
when working on the floor. Adjust the direction to prevent the
machine from losing control, and grind first, then finely.
Features of Concrete Trowel Seat-Driven Machine
1. Greatly reduce labor intensity and provide work efficiency;
2. Double grinding disc construction operation, quick slurry
lifting and smoothing, and has a good compaction effect on the
ground;
3. Mechanical operating system, infinitely variable speed,
sensitive response, comfortable and easy operation;
4. Equipped with the variable-speed operation, high speed, fast
finishing, and low-speed operation can make the pulping of the
grinding disc powerful, and the construction effect is remarkable;
5. Equipped with a high-power engine, electric start/hand-pull
start, and strong power;
6. Equipped with an emergency stop switch, which can quickly shut
down the engine to ensure reliable operation;
7. Equipped with LED lighting, convenient for night construction,
automatic sprinkler function;
8. Equipped with liftable walking wheels, which are convenient
for changing smears, grinding discs, and walking.
