Shaanxi Zhongtuo Mine Equipment Co.,Ltd |
Verified Suppliers
|
|
Rebar Processing Machine Rebar Cold Forging Machine
Product Description of Threading Machine
The rebar connection upsetting cold forging threading machine is
mainly used for the construction of ribbed steel bar rolling
straight thread head, it is an important equipment of steel bar
connection.
The rebar cold forging upsetting machine uses the cold heading principle to make the steel end for plastic deformation, the diameter increased by 4 ~ 6mm, and then processing thread
Technical Parameters of Threading Machine
Model | ZT-40 |
Upsetting Range | 12-40mm |
Cylinder Diameter | 220mm |
Motor Power | 7.5kw |
Power | 380V |
Oil Pump Pressure | 80Mpa/50HZ |
Max. Flow | 5.42L/min |
Upsetting Length | 3-5cm |
Increase Size | 3-5mm |
Work Efficiency | 15-20 s/pieces |
Size | 1250×850×1650mm |
Weight | 800kg |
Features of Threading Machine
1. It can process steel bars with a diameter ranging from 12-40mm.
2. It greatly improves the tensile strength of the joint
3. High efficiency, can produce 300-500 pieces per machine.
4. Environmental protection, safety, economy, and low cost.
Application of Threading Machine
LTDC-36 automatic double-cylinder steel bar roughing machine is to
use high pressure to plastically deform the head of the steel bar
by cold pressing, increase the diameter, and then process the
thread, so that the effective cross-section of the machined thread
is higher than the base material of the steel bar, so as to improve
the quality of the joint. The compressive and tensile strength of
the joint is greater than that of the base material. This machine
tool is suitable for the connection of steel bars in bridges,
subways, etc.