Shaanxi Zhongtuo Mine Equipment Co.,Ltd |
Verified Suppliers
|
|
Diamond Wire Saw Machine for Marble Granite Concrete Cutting with High Effeciency
Description of Hydraulic Wire Saw Cutting Stripping Machine
A wire saw is a kind of saw designed to cut brittle and hard materials using the principle of wire saw wood breaking. The wire saw uses the diamond wire hydraulic motor to cut concrete at high speed and then realizes a relatively complete static cutting surface. Implement large-area, large-volume overall separation for larger-sized concrete structures.
Hydraulic wire saws are competent for closely packed reinforced concrete structures, thick brick walls, and even underwater cutting operations. It can meet the cutting depth that cannot be achieved by hydraulic wall saws. The cutting depth is not limited, the working environment is more adaptable, and the working efficiency is higher. It is the backup equipment of the hydraulic wall saw.
Technical Parameters Related to Accessories
Advantages of Reinforced Diamond Wire Saw Machine
1. The hydraulic wire saw has the characteristics of reducing labor
intensity, overload protection, and strong power.
2. It can double the speed of work to shorten the construction
period, further reduce labor costs, improve bidding advantages, and
expand the scale of acceptable construction projects.
3. The stability of the hydraulic system itself greatly reduces the
loss cost of construction equipment.
4. Low noise and no pollution. During the cutting process of
diamond tools, the electro-hydraulic system runs smoothly, with
only the sound of grinding reinforced concrete, and there is no
high-decibel sound during construction.
5. The construction period is shortened, and the operation can be
stopped at any time node, the equipment does not invade the
boundary, and it is not necessary to remove the equipment to open
the line after the skylight time expires.
Method Steps of Diamond Wire Saw Cutting Machine
1. The diamond wire saw needs to be divided into cutting
directions, and there are clear arrow marks on each clip of the
spring diamond beaded wire saw.
2. If it is not indicated by an arrow, it can also be identified by
the beads of the diamond beaded wire saw itself. The long beaded
base is the tail and the short is the front, so the short front is
the cutting direction of the spring diamond beaded wire saw.
3. Before use, the diamond wire saw is a closed cycle after
docking, if not, it needs to be docked first.
4. When using, please make sure that the cutting direction of the
diamond wire saw is forward, and cannot be cut in the opposite
direction, so as to avoid the taper at the front and rear ends of
the beading, and ensure the normal use of the diamond beading wire
saw.
5. Install the diamond beaded wire saw on the wire saw machine,
relatively tension the diamond beaded wire saw, and then start the
equipment to start working.