Shaanxi Zhongtuo Mine Equipment Co.,Ltd |
Verified Suppliers
|
|
Non-cohesive Steel Strand for Bridge Construction
Definition of The PC Strands
The common interpretation is to apply a layer of grease and plastic sheath on the steel strand (which can be called bare wire). Steel strands and concrete are isolated from each other and can be freely loosened and remain unbonded with concrete, so they are called unbonded steel strands. There are also galvanized unbonded steel strands used for reinforcement projects, that is, galvanized steel strands are coated with grease and plastic sheaths to double guarantee the anti-corrosion results.
Technical Parameter of The PC Strands
Dia(mm) | Tensile Strength(Rm/MPa) | Max strength for hole wire(Fm/kN) | StipulatedNominal Non proportional extension rate(Fp0.2/kN) | Cross section size(mm2) | Approximate weight(g/m) | Tolerance(mm) |
12.7 | ≥1860 | ≥185.1 | ≥166 | 98.7 | 775 | +0.4~-0.2 |
15.2 | ≥1860 | ≥262.5 | ≥235 | 150 | 1178 | +0.4~-0.2 |
12.8 | ≥1860 | ≥358 | ≥318 | 191 | 1500 | +0.4~-0.2 |
Production Process of Non-cohesive Steel Strand
The production process of unbonded prestressed steel strand is as follows: steel strand setting out → anti-corrosion smooth grease coating → plastic wrapping machine wrapped with polyethylene sheath → water cooling → traction → wire taking up → packaging. First, the anti-corrosion smooth grease is evenly coated on the surface of the steel strand through the coating equipment, and the routing speed of the steel strand and the operating parameters of the coating equipment is adjusted to make the steel strand form a uniform anti-corrosion smooth coating; Then, the polyethylene is extruded into tubes through the extruder and tightly wrapped on the steel strand coated with anti-corrosion smooth coating; Finally, the steel strand after the plastic coating is cooled to normal temperature through the cooling water tank, so that the polyethylene sheath can be rapidly cooled and hardened, then the wire is taken in, and the whole production process is completed after packaging.
Application of Non-cohesive Steel Strands
It is mainly used for civil construction projects with large static
loads, large-span workshops, or high-rise buildings. Advantages:
The construction speed is fast, the thickness of the beam plate is
reduced, and the structural performance and economic effect are
increased.
In bridge construction and prestressed construction of large-span garages, due to the large dynamic load, bonded steel strands are necessary for the design, that is, ordinary steel strands. Because the construction grouting is directly bonded to the concrete, it produces a strong gripping force. It is not as difficult to anchor both ends as in the construction of unbonded steel strands, so the safety factor is enhanced.
The difference between the use of unbonded steel strands and bonded
steel strands
The unbonded steel strand is mainly used in the post-tensioning
prestressing system. The difference from the bonded steel strand is
that the prestress is not bonded to the surrounding concrete;
during its operation, the permanent allowable prestress is
longitudinally opposed to the surrounding concrete. slide. The
prestress is completely transferred to the concrete by the
anchorage.