Prestressed Multi Holes Round Wedge Anchorage Lighting Accessories For Photography

Introducing the Prestressed Multi Holes Round Wedge Anchorage, a professional and reliable anchor/hose clamp that serves as a crucial metal fitting in various applications such as wedge anchoring, auto parts, clamps, and post-tension anchors. This prestressing solution plays a vital role in transferring the post-tensioning forces to concrete structures through the anchorages. Constructed with a steel plate featuring multiple conical holes, the anchorage system comprises conical grips and a guide (trumpet). The guide, also known as a trumpet, seamlessly connects the ducts and provides a flat surface for locating the bearing plate securely. The diameter options for PC strands include YM12.7, YM13, and YM18 types, catering to a wide variety of needs. This anchorage system is specifically designed for steel strands with strengths ranging from 1860MPA to 2000MPA, accommodating sizes such as 12.7mm, 12.9mm, 15.24mm, 15.7mm, and 17.8mm. For 5mm-7mm high strength steel beams with a standard strength of 1670Mpa, this anchoring system is a perfect fit. With a wide range of options available, the YM series is suitable for tension anchor systems between 0-12000KN, while the number of steel strands can range up to 55. Choose the Prestressed Multi Holes Round Wedge Anchorage for a reliable and efficient solution for your post-tensioning needs.

Application for the post-tensioning anchor:
Prestressing forces of the post-tension anchor are transferred to the concrete structures through Anchorages. Anchorage for the Post Tensioning system normally comprises a steel plate with several conical holes, the conical Grips, and the Guide (Trumpet). A trumpet or Guide is used to connect the ducts and provides a flat surface for locating the Bearing Plate on it. As shown in the figure below:

The diameter of PC strand can be divided into YM12.7, YM13, and YM18 type anchorage, the anchoring system is mainly applicable to the strength of 1860MPA-2000Mpa and below the level of 12.7mm, 12.9mm, 15.24mm, 15.7mm, and 17.8mm as the standard strength of steel strand of 5mm-7mm high strength steel beam 1670Mpa. Wide range of options, YM is suitable for the design of tension anchor systems between 0-12000KN, and the number of steel strand range is 55;
post-tension anchor Including the M series steel wire tension and anchor system: M13 (anchorage for 12.7-12.9mm steel strand and anchorage (M15) used in 15.2-15.7mm steel wire) with YCW series Jack and ZB4-500 type electric pump for tension; for flat structure BM13 and BM15 flat anchorage for cyclic stress; the structure of the HM13 and HM15 ring anchor.