Shaanxi Zhongtuo Mine Equipment Co.,Ltd |
Verified Suppliers
|
|
High Power Electric Driven Concrete Shotcrete Pump Machine
Introducing the Large Blade Electric Concrete Asphalt Road Cutter,
a high-quality and efficient machine designed to smooth out
materials in no time. With its four-point elastic compensation
compression, this machine boasts a long-lasting wear life,
producing less dust and providing excellent sealing effects. The
stream is uniform, continuous and stable, ensuring an evenly
sprayed layer. Thanks to its new nozzle, the material elbow device
is enhanced, improving the spraying effect further while reducing
rebound and producing a high-quality spray layer. The Pz-5 Dry
Shotcrete Machine is driven by a motor, reducer, rotor assembly,
sealing plate, rubber plate, compactor mechanism, hopper seat, mine
wheel, vibration hopper, compression mechanism, and air systems and
electronic control devices, delivering outstanding performance and
reliability. The motor drives the rotor, which rotates smoothly,
while the gears ensure it operates efficiently. With its tone and
high-quality construction, the Large Blade Electric Concrete
Asphalt Road Cutter is the ideal solution for any construction
project.
Introduction
1 through the rotor-type non-adhesive material cavity, the material
smooth, efficient and time-saving;
2 four-point elastic compensation compression, sealing effect is
good, machine dust less, wearing a long life;
3 stream uniform, continuous and stable;
4 new nozzle, the material elbow device to improve the spraying
effect, less rebound, spray layer of high quality.
To serve as the basis, to the quality of survival, technology and
development
Description
Pz-5 Dry Shotcrete Machine is mainly driven by motor, reducer, rotor assembly, sealing plate,
rubber plate, compactor mechanism, hopper seat, mine wheel,
vibration hopper, compression mechanism and air Systems and
electronic control devices and other components. The motor shaft
ends the drive gear shaft and, after decelerating by the gear unit,
drives the rotor mounted on the output shaft to rotate. After the
gears are decelerated by the gear unit, the rotor mounted on the
output shaft is driven to rotate. The transmission gear is
lubricated by the lubricating oil in the reducer box and the oil
level is measured by the oil injection needle.
Application
PZ-5 dry-mix shotcrete machine is a kind of common shotcrete equipment, which is widely used in
engineering construction, mine, tunnel, culvert, subway, hydropower
project, underground engineering and coal mine marsh roadway
shotcrete construction work: all kinds Type of industrial furnace,
lining the refractory spray molding or repair: all kinds of slope
protection green construction, the soil transport and spraying. The
machine can be used for tidal spray, can also be used for dry spray
and a class of fiber jet operations.
Parameters:
Model | PZ-5 |
Jet capacity | 5.5/h |
Maximum transmission distance | 200m |
Water-cement ratio | <0.4 |
The maximum aggregate size | 15mm |
Feed pipe diameter | φ50mm |
Working pressure | 0.2-0.6MPa |
Air consumption | 7-8/min |
Drive power | 5.5kW(7.5hp) |
Voltage level | 380V,440V,660V,1140V 50Hz/60Hz |
Chassis | chassis can be assembled into a tire type, slippery type, rail wheel type |
FAQ:
Q1: Are you a factory or trade company?
A1: We are a factory. And we have ourselves trading company.
Q2: What is the exact address of your factory?
A2: No.27, Beichen Village Industrial Park, Weiyang District,
Shaanxi Province China.
Q3: Warranty terms of your machine?
A3: One-year warranty for the machine and technical support
according to your needs.
Q4: Will you provide some spare parts for the machines?
A4: Yes, of course.
Q5: What about the voltage of products? Can they be customized?
A5: Our standard voltage is 380V, 50HZ, and 3phase. The voltage can
be customized according to your requirements.
Q6: Which payment term can you accept?
A6: 100% T/T( Decide according to actual situation)
Q7: How long will it take to arrange production?
A7: we can deliver the normal goods within 7-15 days. Other
nonstandard electrical items we will deliver within 25-30 days.
Q8: Can you accept OEM orders?
A8: Yes, with a professional design team, OEM orders are highly
welcome.
Q9: Which trade term can you accept?
A9: Available trade terms: FOB, CIF, CFR, EXW, etc.
Q10: Do you provide samples? Is it free or extra?
A10: Yes, we could offer you the sample machine. But it's not free.
You need to pay for the sample and the cost of the freight.
Q11: What are your terms of payment?
A11: We accept T/T, Western Union, Money Gram, Paypal, L/C, etc.
Why you choose us:
1. We are a real factory offering products and providing free
technical advice.
2. Company in business for many years and served Over 50 countries'
customers.
3. All machines with CE, ISO, and SGS certificates. Machine and
spindle warranty 1 year.
4. We have phone support in English, if you have any questions, you
can call us, and we can give you the best solution within 24 hours.
5. Fast delivery, save your time.
Product source (made in china):
https://zhongtuoks1019.en.made-in-china.com/