|
Trade Verify
Address: 20F Zhongchuang Budg.,Times Commerce Plaza, 396 Tongjiang Ave, Changzhou
Contact name:June
Changzhou Junhe Technology Stock Co.,Ltd |
|
Verified Suppliers
|
|
|
Yellow Zinc Stearate Release Agent / Zinc Phosphate Pretreatment 80-120
Zinc Stearate Release Agent Introduction
Zinc Stearate Release Agent consist of organic acid, non-ion surface active agent and zwitterion free from phosphor and nitrogen.
Bath solution compound: Put cold water into the tank till three-quarter with appropriate degreasing agent, then stirring, after, add sufficient water till working level, after, heat bath solution till operating temperature.
Zinc Stearate Release Agent Application
Be suitable for degreasing zinc stearate remained on aluminium work pieces’ surface.
Control parameter:
compound concentration: 40-60kg/1000l
| Outlook: | Yellow | Free Acid: | 80-120 |
|---|---|---|---|
| Temperature: | 50-70 Degree | Time: | 5-10minutes(dipping) |
| Aluminium Ion Content: | 500PPM | Package: | 25kg/barrel,200kg/barrel |
Test method: free acid:
1. pipet 10ml sample to conical beaker,
2. drip 3-4driping bromphenol indicator,
3. drip 0.1n NAOH into the solution, stop when yellow change to blue.
4. the consumption of NAOH is the free acid.
Reserve requirement:
Reserve in dry shady and cool place to avoid sunshine.
Packing:25kg/barrel,200kg/barrel
Effluent disposal: Should observe chemical products disposal rules.
bath solution is acid which should be neutralized or disposed before drain.
