Quick-opening health class pressure protection conventional rupture disks /burst disk / flat bursting discs

Quick-opening health class pressure protection conventional rupture disks /burst disk / flat bursting discs

Sanitary bursting discs and clamps, quick access to use the chuck, the main for medicine, food, fine chemicals and other industries.

Advavtage

1.Simple structure, high sensitmty, accuracy, zero leak, strong discharging capability, and strong capability of recycling under pressure

2.It maintains high operation precision even in sticky, high-temperature,low-temperature, and corrosive environments in combination with a safety valve.

3.It is an ideal safety device for ultra-high pressure vessels, widely used in the omchemical, pharmaceutical, new energy, and low-temperature equipment industries.

4.It can be classified into three catagories: domed bursting discs, reverse domed bursting discs and flat bursting discs.

Features

· Broad range of application, and can choose the corresponding assembly according to different burst pressure and vent area.

· Manufacturing ranges depend much on material strength.

· Designed for gas, liquid service

· Suitable for high temperature and pressure conditions.

· Maximum operating pressure equal to or less than 70% of the minimum burst pressure, and not suitable for pressure pulsating conditions.

· Fragments on burst.

· Short service life and easily cause creep deformation and fatigue damage

· Obvious temperature effect may cause burst pressure fluctuation. The temperature goes up while burst pressure declines.

Property

1 )The maximum operating pressure is up to 80% of the bursting pressure; the product is not applicable to environments with fluctuating pressure, which leads to metal fatigue;

2)The product leaves a small amount of debris after bursting, and can not be used in tandem with a safety valve.

When TEF or a similar material is used for sealing, the working temperature of the product may be restricted by that of the seal membrane material.

3)Based on the specific process needs of a system, auxiliary devices such as a vacuum bracket or a stiffening ring can be added to obtain LPZ, LPH, or LPHZ models.

Application

 Gaseous, liquid, or powdery environments with a medium or low pressure.

Specifications

· Manufacturing Pressure Ranges