Xian Zealchon Electronic Technology Co., Ltd. |
|
D025 Waterproof coating (coiled material) seam deformation capacity
fatigue testing machine
Test geotextile wide strip specimens and various rubber materials (waterstop materials), waterproof membranes, waterproof sealing materials, cables and other composite materials for dynamic fatigue tensile testing. Tensile, burst and tear performance tests. The joint and seam tensile of geotextile and geosynthetic fabric were measured with a wide sample. Road and bridge tunnel joint glue anti-fatigue test, road asphalt mixture and inorganic binder, concrete reflection crack test. This machine complies with: "Waterproof coating for road and bridge" JC/T 975-2005, 6.20; "Polyurethane waterproof coating" GB/T 19250-2013, 6.25
Technical parameter
1. Instrument composition: Servo electric cylinder, reaction frame,
dynamic control acquisition instrument, computer software, etc.
2. Servo electric cylinder: stroke 80mm; using gate type ascending
and descending distance: 900mm
3. Stress control: load 50KN; 100KN (optional);
4. Dynamic vibration stress control 0-100kN accuracy ±2N
(optional);
5. Constant stress control, loading waveform, and collecting
dynamic deformation gap pressure.
6. Strain control: 0.1~5mm/min control loading waveform (sine wave)
7. Constant displacement and constant deformation tension and
compression: arbitrarily set tension, compression, displacement,
deformation and time
8. Tensile stress control: Servo motor, arbitrary setting, constant
force, collecting fracture, creep, deformation and time
9. Vibration frequency: 0~5Hz arbitrarily set; other vibration
frequencies are optional
10. Amplitude: 0.08~1.5mm
11. Collecting load force: accuracy 1/100
12. Vibration pressure segment, frequency and waveform can be set
to 13 segments of continuous vibration.
13. Speed: 0.001mm~300mm/min stepless speed regulation;
14. Deformation range of test piece: 0~600mm Accuracy: 0.01mm
15. Stretching fixture: 200mm, 150mm, 100mm, 75mm
16. CBR bursting fixture: ring fixture with height of 1500 and
inner diameter of 150mm
17. Top pressure rod: diameter 50mm, height 100mm, the top edge is
turned into a circular arc with a radius of 2.5mm.
18. Piercing ring fixture: inner diameter 45mm, height 100mm,
flat-head pressing rod diameter 8mm±0.01mm, top inverted foot edge
0.5mm×45°
19. Voltage: 220V±5V Power: 10kW
20. Special test mode: stretching 400×200×50mm; road surface
reflection crack test mode 300×300×100mm and other specifications
optional
21. Environmental chamber (optional): -20℃~60℃ can be adjusted
arbitrarily.
22. LCD real-time display, connected to the computer, the software
processing power, deformed original data display graphics for data
analysis.
Dedicated software, connected to computer data collection,
processing the force and deformation of each channel; breaking
constant force, deformation time, real-time display and storage of
curve graphics and original data for analysis and evaluation.