Active Member
|
[China]
Address: Beiyuan Industrial Park,Liuquan Road,Zibo City,Shandong,China
Contact name:April
Zibo JC Eco-tech Co.,Ltd. |
|
JC Jewelry Gold Melting Furnace Jewelry Tools Equipment
Specifications
JC
Jewelry Gold
Melting Furnace
Jewelry Melting Furnace
Gold Melting Furnace
Jewelry Tools Equipment
Product Description
JIUCHEN Gold Melting Furnace is made for casting, reclaiming, alloying, and refining gold, silver and other metals withsimilar or lesser melting temperatures.Equipped with electronic temperature controls with digital displays, this melter can reach a maximum tem-perature of 2192F (1200C).
JIUCHEN Furnace comes with durable construction and made of double walled stainless steel. For enhanced thermal efficiency ceramic fiber is used between outer and inner chambers. The temperature is regulated by a microprocessor based digital controller which ensures temperature stability of +/-1°C. For safe operation of the equipment, over temperature controller protects the heating elements. Heating elements are easy to replace, made of international standard quality material and fluxes resistant.
Product Accessories
Model JC-K-220-2(220V 2kw) Red,Blue ,Gray color is optional
1-1kg graphit crucible
1-crucible tongs.
1-100g Mould.
1-replacement fuse.
1-insulating heat glasses.
1- gloves.
Breif Instruction
Use | Removable crucible furnace for melting or maintaining melted state of non-ferrous metals.Handling the crucible with tongs. |
Construction | Access to crucible from top,manual cover closing |
Insulation | Multilayer insulation with double thickness of ceramic fiber |
Electricity | Single-phase 220VAC,2000W,50Hz,220V standard plug |
Heating | Silicon Carbide chamber with no crack,no distortion,comparied with other traditional ceramic fiber chamber and quartz chamber |
Working temp | 2192F (1200C) Temperature controlled with an accurate digital thermostat |
Melting Speed | (Model JC-K-220-2) 15-20mins heat up to 1200 Degrees Celsius 25-30Mins(JC-K-220-1) heat up to 1200 Degrees Celsius |
Standard Delivered with | 1x1kg crucible,1xcrucible tongs,1xinsluation glasses,1xgloves |
The furnace has two on/off switches:the GREEN switch turns on the temperature thermostat allowing you to set the
desired melting temperature.
The RED switch turns on the heating element to start the melting process.
The thermostat has two digital read-outs: the bottom readout (SV) displays the setting you enter into the furnace. The top read-out (PV) displays the actual temperature inside the crucible during operation.
To set the desired melting temperature, turn on green on/off switch. Wait a few seconds; the bottom (SV) readout should show the default temperature setting of 1950°F.
To change the temperature setting, simply press the left arrow key to move the cursor to the proper desired digit and press the up or down keys to adjust it up or down. Adjust each digit to the desired setting.
When you are ready, place the metal pieces or grain in the crucible and set the crucible in the furnace. Close the lid.
Press the red button to start the melting process.
When the metal is molten and has reached casting temperature, turn off the red switch. Open the lid and pour the metal into your prepared flask.
Technical Parametre
K Series | ||
NO. | JC-K-110/220-1 | JC-K-110/220-2 |
Volt/Power | 110/220V-1KW | 110/220V-2KW |
Current/Frequency | 9.1AMP/4.5 AMP-50HZ | 18AMP/9.1 AMP-50HZ |
Temp Display mode | °C/°F | |
Measuring Range | Working temp:1250C Max temp: 1300C | |
Heating Rate | 25 mins | 10 mins |
Capacity | 1kg-3kg(coordinate with crucible) | |
Temp Control Mode | Adopting AI PID control method; Measured values (PV), set data (SV) can be shown at the same time; Set data can be changed by arrow buttons | |
Spare Parts | Power cord, 1kg capacity crucible, one crucible tong, ceramic members | |
Size | Body:170*200*350mm,Melting chamber: Dia 70*145mm,Other size is customizable | |
Features
1. High purity fiber alumina chamber for energy saving - chamber size: 63 mm dia. x 160 mm deep.
