Active Member
|
[China]
Address: New Era Business Center, No. 145 Zhengtong Road, Zibo City, Shandong Province, China
Contact name:Scarlett
United Tech Industrial Group Co., Ltd. |
|
|
Single Shaft Shredder Introduction:
Single shaft shredder is available to recycle wide range of
material. It is an ideal machine for plastic, paper, wood, fiber,
rubber, organic waste a wide variety of non-metallic materials. As
per our customer’s requirements, such as the input size of
materials. Capacity and the final output size etc. We could work
out a suitable proposal for our clients. After being shredder by
the machine, the output material could be used directly or go int
to the next step of size reduction.
With the function of Siemens microcomputer control system, it is
possible to control automatically start, stop. Automatic reverse
sensors to protect the machine against over loading and jamming.
The output capability typically range between 300kg/hr –5,000kg/hr+
depending on the different model and different materials.
Cutting Principle about the Single Shaft Shredder:
The cutting part of the single shaft shredder including the rotor,
rotor blade, counter blade and the screen. The minimum mounting
clearances between the rotor blade and counter blade is 0.1mm. The
motor drive the rotor by high speed rotating trough the speed
reducer, therefore the rotor blade cutting the counter blade. After
one cutting, the materials will be discharged if its size smaller
the screen mesh size. Or the material will be double or more
cutting, until the size is smaller than the screen holes.
Single Shaft Shredder Advantage:
* Detachable Rotor Blade, easy disassemble and installation, and
simple maintenance.
* Automatic Feeder, increase produce efficiency.
* Equipment passed the CE, meet the Europe Safety Standard.
* Quick change Screen for accurate particle size control.
* Shock Absorbing Gearbox reduces stress on Drive components.
* Integrated Rotor, assured the cutter clearance between the Rotor
Blade and the Counter Blade.
* Enclosed Bearing protection design, waterproof and dustproof,
extend the bearing work life.
* Siemens PLC Control System, automatic reverse sensor to protect
the machine against over loading and jamming.
* Provide the Rotor Cooler System against the low melting
materials, prevent the materials burning while the temperature
higher.
Single Shaft Shredder Applications:
Plastic: Film; Jumbo Bag; PET Bottle; Plastic Barriers; Plastic
Pipe; Plastic Boards
Hard Plastic: Plastic Lump (Purgings); Fiber, High Strength
Engineering Plastics ( ABS, PC, PPS, etc.)
Wood: Timber; Tree Root; Wood Pallets; Wood Package, etc.
Paper:
Industrial Solid Waste: Cable; Light Metal, like Aluminum Can,
Aluminum Scrap, etc.
White Goods, like TV Shell, Washing Machine Shell, Refrigerator
Body Shell, Computer Shell, Circuit Board, etc. Solid Waste, like
Household Garbage, Medicinal Waste, Industrial Waste.
Single Shaft Shredder Technical Data:
| Model | S2250 | S2260 | S3060 | S3080 | S4080 |
| dimension L/W/H(mm) | 1780*1190*1690 | 1780*1290*1690 | 2455*1478*1700 | 2455*1678*1700 | 2825*1747*1875 |
| Cutting Chamber Size(mm) | 790*500 | 790*600 | 1200*600 | 1200*800 | 1400*800 |
| RAM(mm) | 500 | 600 | 600 | 800 | 800 |
| Rotor Blade Diameter(mm) | 220 | 220 | 300 | 300 | 390 |
| Rotor Ratate Speed (r/min) | 80 | 80 | 80 | 80 | 80 |
| Rotor Blade Size(mm) | 35*35*23 | 35*35*23 | 40*40*25 | 40*40*25 | 46*46*30 |
| Rotor Blade Quantity (PCS) | 20+4 | 24+4 | 30+4 | 42+4 | 42+4 |
| Counter Quantity(PCS) | 2+2 | 2+2 | 2 | 2 | 2 |
| Rotor Motor Powder(KW) | 15 | 18.5 | 22 | 30 | 37 |
| Material Return Power(KW) | 1.5 | 1.5 | 2.2 | 2.2 | 2.2 |
| Net Weight(KG) | 1300 | 1400 | 1550 | 1950 | 3500 |
| Model | S40100 | S40120 | S40150 | S48150 | S48200 |
| dimension L/W/H(mm) | 2825*2004*1875 | 2825*2564*1875 | 2825*2964*1935 | 3255*4415*2720 | 3255*4415*2720 |
| Cutting Chamber Size(mm) | 1400*1000 | 1400*1200 | 1400*1500 | 1650*1500 | 1650*2000 |
| RAM(mm) | 1000 | 1200 | 1500 | 1500 | 2000 |
| Rotor Blade Diameter(mm) | 390 | 390 | 390 | 480 | 480 |
| Rotor Ratate Speed (r/min) | 80 | 80 | 80 | 80 | 80 |
| Rotor Blade Size(mm) | 46*46*30 | 46*46*30 | 46*46*30 | 60*60*30.5 | 60*60*30.5 |
| Rotor Blade Quantity (PCS) | 54+4 | 66+4 | 90+4 | 90+4 | 114+4 |
| Counter Quantity(PCS) | 25 | 2 | 3 | 3 | 4 |
| Rotor Motor Powder(KW) | 45 | 55 | 75 | 90 | 75+75 |
| Material Return Power(KW) | 5.5 | 5.5 | 5.5 | 7.5 | 7.5 |
| Net Weight(KG) | 4000 | 5000 | 6200 | 11000 | 11000 |
| Model | S66150 | S66200 | S66250 | S66300 | S66400 |
| dimension L/W/H(mm) | 4100*3450*3000 | 4100*3950*3000 | 4100*4450*3000 | 4100*5500*3000 | 4100*6800*3000 |
| Cutting Chamber Size(mm) | 1550*1500 | 1550*2000 | 1550*2500 | 1550*3000 | 1550*4000 |
| RAM(mm) | 1500 | 2000 | 2500 | 3000 | 4000 |
| Rotor Blade Diameter(mm) | 660 | 660 | 660 | 660 | 660 |
| Rotor Ratate Speed (r/min) | 80 | 80 | 80 | 80 | 80 |
| Rotor Blade Size(mm) | 60*60*30.5 | 60*60*30.5 | 60*60*30.5 | 60*60*30.5 | 60*60*30.5 |
| Rotor Blade Quantity (PCS) | 126+4 | 158+4 | 225+4 | 291+4 | 363+4 |
| Counter Quantity(PCS) | 3 | 4 | 5 | 6 | 8 |
| Rotor Motor Powder(KW) | 75+75 | 90+90 | 110+110 | 132+132 | 160+160 |
| Material Return Power(KW) | 7.5 | 7.5 | 7.5 | 7.5 | 7.5 |
| Net Weight(KG) | 12100 | 12500 | 14200 | 15500 | 17500 |
Note:
1. the voltage about the power supply can be selected by the
customer’s specific requirements.
2. the shredder capacity can be influenced by the material
composition and output size.
Q: Why choose us?
A: Several year‘s experience
Our United Tech have rich experience in the machinery and
equipment. Our machines have high reputation at our country and
abroad (such as the Middle East,Southeast Asia,US and other
countries and regions.)
Manufacturer, not dealer
Factory direct sale makes price more competitive. Customer are
always welcome to our factory.
Fast delivery:
We promise the goods can be shipped out on delivery date after
confirmation of the order.
Professional after-sale service
Professional after sale service.if necessary,oversea installation
and provide technical exchange, train client to operate the
machine. Any other reasonable assistance What you needed, please
contact us.
Q: How about price?
A: Our United Tech is a factory and be able to give you the lowest
price than market one, and we have a policy that “ for saving time
and absolutely honest business attitude, we quote as competitive as
possible for any customer, and discount can be given according to
quantity”.
Q: When we only building one shredder machine production line, can we
use it to shred wood material or waste metal material?
A: Yes, you can. It depends on the difference of blades teeth and
quantity.Can be customized.
Q: What is the difference between your machine and others’?
A: Every machine is unique, We can help you decide your unique
situation and decide which machine is right for your production.
Q: Will you dispatch the engineer to guide installation the high
output shredder equipment ?
A: Yes, as to the customer’s requirement, our United Tech can
dispatch engineer to guide installation to the high output shredder
equipment .
Q: How about you to ensure the shredder machine equipment normal
running?
A: Except the installation engineer, we also provide the production
engineer to guide how to keep a good production.
