|
[China]
Trade Verify
Address: Miao Sheng Si Town,Gui si Street,Zhenhai Ningbo(near Zhenhai Dadao)
Contact name:ROY
ningbo konger machinery co.,LTD |
|
Verified Suppliers
|
|
|
K-TEC120/DRY Servo System Hydraulic Plastic Injection Molding Machine
| SPECIFICATION | CN | K-TEC120/DRY | ||
| VB | cm³ | 473 | ||
| INJECTION UNIT | A | B | C | |
| Screw Diameter | mm | 35 | 38 | 42 |
| Screw L/D Ratio | l/d | 22.8 | 21 | 19 |
| Shot Volume | cm³ | 163 | 192 | 235 |
| Injection Weight(PS) | g | 148 | 175 | 214 |
| Injection Rate | cm³/s | 92 | 108 | 130 |
| Injection Pressure | mpa | 219 | 186 | 158 |
| Screw Speed | rpm | 220 | ||
| CLAMPING UNIT | ||||
| Clamping force | kn | 1200 | ||
| Toggle Stroke | mm | 360 | ||
| Space Between Tie-Bars(WxH) | mm | 410x410 | ||
| Max. Mold Height | mm | 400 | ||
| Min. Mold Height | mm | 160 | ||
| Ejector Stroke | mm | 100 | ||
| Ejector Tonnage | kn | 30 | ||
| OTHERS | ||||
| Max. Pump Pressure | mpa | 16 | ||
| Motor Power | kW | 14 | ||
| Heater Power | kW | 7.55 | ||
| Machine Dimension | m | 4.4x1.2x1.8 | ||
| Oil Tank Capacity | l | 220 | ||
| Machine Weight | ton | 3.8 | ||
