Paper Egg Tray Molding Machine
Paper Egg Tray Production Line
Process.1----Pulping System:
To feed various waste paper and water materials into the pulping
machine, and after about 10~20 minutes of high concentration
stirring, the slurry will be automatically transported to the
storage tank, then transported by the slurry pump to the mixing
tank, mixed to the required concentration of pulp, and transported
to the forming machine.
Process.2----Forming System:
The molding machine adsorbs the pulp conveyed by the slurry pump to
the hopper of the molding machine onto the molding machine mold,
and uses the vacuum system suction to adsorb the pulp onto the
molding machine mold, sucking excess water into the sewage tank,
after the mold of the molding machine adsorbs the pulp, it is
formed and then the mechanical arm of the molding machine takes out
the finished product.
Process.3----Finalizing System:
After the molding machine out the finished products, the trays
could be taken out by manually and to be dried by natural air.
If high capacity production line, the trays could be transmitted to
drying machine automatically, to dry in short time and output.
Then the trays to be pressed, stacked and packaged, automatically
or manually accoridng to customer request.
