Active Member
|
[China]
Address: No.3 Hengshan Road, ETDZ,Yantai,Shandong,China
Contact name:Summer
Yantai Auto Instrument Making Co.,Ltd |
|
|
Water Oil Differential Pressure Level Transmitter 4-20ma HART Protocol
Differential Pressure transmitter
Introduction
Differential pressure transmitter/pressure transmitter is a measure of the difference between the two ends of the transmitter ,output standard signal (eg 4 ~ 20mA, 1-5V) differential pressure transmitter and pressure transmitter with the general difference is that there are two pressure ports, the differential pressure transmitter is generally divided into positive and negative terminal end, under normal circumstances, Positive pressure side pressure should be greater than the negative pressure section.
Features:
1. Process Fluid: Liquid, Gas, Vapor
2. Applicat ion: Differential Pressure, Gauge Pressure,Absolute Pressure
3. Working Temperature: -25 to +95C
4. Current Output: 4 - 20 mA 2 wires Har t Protocol
5. Power Supply: 24VDC
6. Ambient Temperature: -25 to +240C
7. Process connections: 1/4 - 18 NPT or 1/2 - 14 NPT
8. Electrical Connections: 1/2”NPT or M20*1.5
9. Enclosure:IP65
10.Intrinsically Safe: ia II C T6
11.Explosion proof: d II B T5
Ordering Sheet
| Name | Specification code | Description | ||
3051GP 3051DP | Pressure Transmitter Differential Pressure Transmitter | |||
| 3 | (0.013-0.075)bar | |||
| 4 | (0.062-0.374)bar | |||
| 5 | (0.31-1.868)bar | |||
| 6 | (1.17-6.9)bar | |||
| 7 | (3.45-20.68)bar | |||
| 8 | (11.7-68.90)bar | |||
| 9 | (34.8-206.8)bar | |||
| 0 | (68.9-413.7)bar | |||
| Output Signal | E | analog type 4-20mA | ||
| S | 4-20mA, HART Protocol Digital Communication | |||
Wetted Parts Material | Flange/Joint | Exhaust/Drain Valve | Diaphragm | |
| 22 |
Stainless Steel |
Stainless Steel | 316L Stainless Steel | |
| 23 | Hastelloy C-276 | |||
| 24 | Tantalum | |||
Mounting Bracket | B1 | Tube-type Curved Bracket (Tube ODΦ50~Φ60) | ||
| B2 | Board- type Curved Bracket | |||
| B3 | Tube-type Straight Bracket (Tube ODΦ50~Φ60) | |||
Display Header (optional) | M2 | Linear Pointer Header (0~100% scale) | ||
| M3 | Square Root Instruction Header(0~100% scale) | |||
| M4 | LCD Header(0~100% linear display) | |||
Process Flange | D | The liquid discharge / exhaust at the back | ||
| D1 | The liquid discharge / exhaust at the side top | |||
| D2 | The liquid discharge / exhaust at the side bottom | |||
| Flange Joint | J | “D-shaped” Joint with “ M20*1.5” External thread | ||
| N | Joint with 1/2-14NPT taper pipe thread waist type | |||
Q: Are you trading company or manufacturer ?
A: We are factory. Our company is one of the largest instruments manufacturer in Shandong Proveince, China.
A: For small orders, we can deliver within 3-5 working days, for bulk orders, we usually need 15 working days or longer. But if you need goods urgently, we can arrange expedited production.
A: Yes, we could provide the sample. But, you need to pay for the cost.
A: We have CE certificate, ISO9001 Quality Control Certificate, Explosion Proof Certificate, etc.
A: Our main products are Pressure transmitters, flow meters, level meters, level switch, etc.
CE CERTIFICATE AND ISO9001
