Active Member
|
[China]
Address: No.2, Xiyuan 7RD, Science & Technology Area,West Lake, Hangzhou, Zhejiang, China
Contact name:Ivy
Hangzhou Youngsun Intelligent Equipment Co.,Ltd |
|
|
Shrink wrapper machine model YS-ZB-6I
1. Technical parameters
| YS-ZB-6I | Tunnel | |
Power supply | 3P AC380V±10%/50Hz | AC380V(1±10%),50Hz,16A,66kW | |
Control power | 24VDC |
| |
External gas source | 4~6Kgf/cm2,External pipe Dia. :ø12mm | ||
Gas consumption | 60L/min |
| |
Machine size(L×W×H) | 13345×1570×2510(customer made) | L4556mm×W1570mm×H2300mm(customer made) | |
Length of tunnel | L3000mm×W1260mm×H880mm(customer made) | ||
Chain wide of tunnel |
| 700mm | |
Max packing speed | 40-45 package/min (Based on product type) | ||
Packaging object combination | 2*3,3*4,4*6 etc | ||
Bottle size | 200ml-1.5L(customer made) | ||
Bottleneck | 55-120mm(customer made) | ||
Height of bottle | 120-300mm(customer made) | ||
Working plate height | 1150±50㎜(customer made) | ||
2. Film parameter Film type: Transparent and white PE film (Color optional)
Ø Film width:200-1000mm
Ø Film thickness:0.06-0.2mm
Ø Film weight:≤40KG
Ø Roll Diameter of film:≤450mm
Ø Film shrinkage ratio:
Longitudinal 70-80%,crosswise 20-30%
3. Main motor power:9.04KW,Tunnel power:63.75KW
Ø Servo motor of Divide bottle :380V 820W×2
Ø Main servo motor:380V 3300W
Ø Cut film servo motor:380V 820W
Ø Feed film servo motor:380V 1480W
Ø Bottle and conveying chain motors:380V total 1350W
Ø Export belt motor:380V 750W
Ø heat shrinkage fan motor:380V 750W
Ø Chain mesh belt motor:380V 750W×4
Ø Heating tube:380V 2000W×30
4 Machine Feature:
l Mechanical adjustment;Without changing the packaging collation,but only change the bottle bottle size,it costs about 20 minutes；Without changing bottle size but need change the packaging collation, it will not cost more than 10 minutes.
l Divide bottles and group;Using straight-line’s way to divide bottles,and grouping bottles by the number of packages required,it uses serve motor control,accurate positioning,debugging simple and reliable.
l Hold bottle with wrapper film; Each group movement distance of the bottle controlled by the hold bottle bar,synchronized with pick film,and pushes the bottles to the mantle section of the belt；the device of push bottle bar and pick film bar are equipped with a torque limiter,when fall bottle and clip bottle,the machine will be safety automatic stop,after solve the fault ,please turn the limiter hand wheel to reset machine.
l Mechanical drive:The machine transmission driven by servo motor,it adopt synchronous belt and chain transmission combination form,the position of the chain transmission and lubrication device are added have a shield, to ensure staff safety and environment clean.
l High degree of automation:This machine use PLC programming control,electric control parts are imported,reliable pneumatic device and the advanced electronic control technology.
l Stable property:The machine adopts full servo control.
l Simplicity of operator:All functions on the touch screen interface.
l Low failure rate:Materials used in solid, electrical and pneumatic components were imported.
l Operational safety:The machine is equipped with a safety shield and safety protection device
5 Machine function:
² The products in front production line convey to the front conveyor line of our shrink wrapper machine.
² Through vibration bottle part to shunt the products to the various channels.
² Driven bottle organizations will divide bottles group accordance with the packaging combinations.
² Finally by PE film as the material to shrink-wrapped products of the whole group.
² Connect with the tunnel to shrink package so that the products appearance beautiful, generous.
² With manual and automatic operation mode.
² It can display instantaneous and total number of packages,and can be connected to the printer to print out.
² Replace the setup quick and accurate.
² The control panel can be directly input and modify packaging variety of parameters,also can store many different packaging specification parameters.
² Real-time monitoring the whole process of equipment operation, has self diagnosis function.
² According to the change of front production line, automatically control the speed of the machine.
6 Electrical configuration:
u PLC(programmable logic controller):Germany“Siemens”
u Touch screen:Taiwan“Wilen”or Germany“Siemens”
u Contact:France “Schneider”
u Transducer:France “Schneider”or Denmark “Danfoss”
u Proximity switch:Germany “P+F”
u Button switch:France “Schneider”
u Intermediate relay:France “Schneider”
u Cylinder:Taiwan“Air TAC” or German“FESTO”
u Servo motor:Germany“Siemens”
u Other motor:Germany “SEW”or China“MEIWA”
7. Working process:(refer to the follow picture)
① Original lines convey
② Bridging transition convey
③ Shake bottle divide convey
④ Catch bottle divide group convey
⑤ Hold bottle cover film convey
⑥ Shrink complete
