SENKO, LSZH 12F, Type B, Pre-terminated MPO to LC Harness Patch Cords

MPO/MTP Pre-terminated Harness Patch Cords/Cables

Description

MPO Fanout cable assemblies are with a single 12/24 core MPO connector in one end and LC/SC connectors in another end. Directly connecting the backbone cable with the equipment without MPO cassette, besides it, the cable is also used for cable expansion in the data center.

Features

• 12 to 144 core cable connection
• Adopts 4, 8, 12, or 24 core MPO connectors. Reduce fault failure rate and save space
• Smoothly upgrade 10G network to 40G, 100G network, support 100G transmission latency requirement
• Optional multimode OM3, OM4, single-mode G 652D, G 657A2 fiber requirement
• Adopts mini round type cable, small diameter, with smaller trunk cable and smaller bending radius, easy for storage and cable install
• Use dustproof, compressive strength, tensile strength protective sleeve at both ends, which can effectively protect cables and fiber optic connectors in the transportation and installation process from damage

Standards Compliance

• TIA/EIA-568-C
• IEC-61754-7
• NFPA 262 (OFNP) or IEC 60332 (LSZH)
• IEC-60793
• GR-1435-CORE

Applications

• Data Center
• High-density fiber optic cable management
• 40Gb/s or 100Gb/s Applications

Connector Specifications

MTP/MPO Connector Geometry Parameters

Item	X-axis		Y-axis
	Min	Max	Min	Max
Radius of Curvature (mm)	500	-	50	-
Polishing Angle	0-0.2	0+0.2	8-0.2	8+0.2
Fiber Height (nm)	1000 ~ 3000
Max Fiber Height Error (nm)	600
Adjacent Fiber Height Error (nm)	-300 ~ +300
Avg. Fiber Height Error (nm)	-300 ~ +300
Central Concave (nm)	300
Interferometer view of MTP Connector

Fiber Specification

*The effective modal Bandwidth for multimode is 850nm.

Patch Cable Structure

Notes:

Fiber Core: 2, 4, 8, 12, 24

Cable Sheath Color:

Yellow – SM Fiber Cable (OS1OS2)

Orange – MM Fiber Cable 62.5/125 (0M1), 50/125 (OM2)

Aqua –MM Fiber Cable 50/125 (OM3)

Violet –MM Fiber Cable 50/125 (OM4)

Strength Member: Aramid yarn

Color Coating Fiber: (2 to 24) x φ250μm colored fiber, international standard color code (YD/T 901-2001), and 12 circular chromatography

Standard Cable Specifications

Cable Length and Tolerances

Order Information

1. Connector End A (MPO/MTP):

Connector Brand: SENKO, US CONEC, etc.

Connector Loss: Standard Loss or Low Loss

Connector Type: MPO or MTP / PC or APC, Male or Female

2. Connector End B:

LC/UPC, LC/APC, SC/UPC, SC/APC, FC/UPC, FC/APC, E2000/UPC, E2000/APC, ST/UPC, etc.

3. Cable & Fanout/Leg Jacket:

LSZH, PVC, OFNR, OFNP, etc.

4. Cable & Fanout/Leg Diameter:

Cable Diameter: 0.9mm, 2.0mm, 3.0mm, 3.6mm, 4.5mm, 5.0mm & 5.5mm Round Cable, Bare Ribbon or Flat Ribbon Cable

Fanout/Leg Diameter: 2.0mm, 3.0mm Round Loose Tube

5. Fiber Count:

8, 12, 24, etc.

6. Fiber Type:

G.652D, G.657A2, OM1, OM2, OM3, OM4, OM5, etc.

7. Total Length:

1 to 999 meters

8. Fanout/Leg Length:

0.2 meters, 0.5 meters, etc.

9. Polarity:

Type A, Type B, Type C

Connector Brand, Connector Loss,

Connector End A - Connector End B,

Cable Jacket, Fiber Count, Fiber Type, Total Length,

Fanout/Leg Length,

Polarity

Example:

MTP Pre-terminated Harness Cables,

US CONEC Brand, Standard Loss,

MTP/PC Male to LC/UPC,

Aqua LSZH, 12 Cores, OM3, 10 meters,

Fanout 0.5 meters,

Type B