Metallic magnetic microwave sintering and muffle furnace microwave heating system

Metallic magnetic microwave sintering and muffle furnace microwave heating system

Application: sintering experiments of powder metallurgy, hard magnetic, soft magnetic, metallic magnetic, structural ceramics, varistors, thermistors, piezoelectric ceramics, microwave dielectric ceramic, honeycomb ceramic, porcelain, ceramics, carbon materials, catalysts, high purity alumina, magnesium oxide, zinc oxide, zirconium oxide, aluminum hydroxide, zirconium hydroxide, nonmetallic substance and other fine products, all kinds of powder materials such as LED, tricolor, long afterglow of rare earth luminescent materials, battery materials (cobalt lithium, lithium manganese oxide, the three elements, lithium iron phosphate, nickel hydroxide, etc.), research experiments technology of all kinds of ceramic pigment, glaze, inorganic pigments, barium titanate, strontium titanate, strontium titanate, barium zirconate titanate , metal carbides, nitrides alloy, diamond oxidation, graphite reduction.

Features:

It adopts PLC as the control center, utilize PLC intelligent judgement method to adjust the pre-heating temperature automatically, memory and store data, to ensure successful completion of test at a high degree of automation.

Temperature accuracy up to ± 2 C performance stable and reliable

With optional program, the user can set 10 segments time-temperature control process according to requirement, to complete variety of temperature curve control, it is easy to operate and widely used.

The display interface is LCD screen; it could show the experimental process, time, temperature and function simultaneously.

New microwave field insulation material with good insulation properties

Rapid heating speed, save energy significantly.

Change heating chamber and thermocouple quickly according to variety of requirement.

Precise and durable

Use condition and user-supplied material

1. Ambient temperature:1℃～40℃

2. Relative humidity: less than or equal to 85%

3. Power supply: AC380V±38V,50Hz±1Hz.

4. The equipment running under altitude of 1000 meters with good ventilation, there should not have strong corrosion gas, strong electromagnetic equipment and strong permanent magnetic field around equipment.

5. The equipment should be set on flat ground; the room is spacious, with moderate bright light.

6. Before operation,all products and equipment and facilities must be inpect carefully,in particular to check the electrical wiring system and to make sure that it is properly reliable, abnormal situation should be checked and corrected timely.

7. The operator must be professionally trained personnel, and have to familiar with the operation manual, relevant equipment, instrument, facilities etc; unqualified worker should not operate this equipment.

8. Use special containers accompany with the equipment, other containers can not be placed in furnace chamber.