Active Member
|
[China]
Address: chuangxin road,Fengnan district,Tangshan
Contact name:Emma
Effemax global industrial co.,limited |
|
|
Carbide and cermet tipped cold saw blades for cutting solid bar,pipe,profile
Cermet tips are ceramic material bonded with metal in a special way to allow their attachment to sawblades
Cermets are harder and more heat resistant than tungsten carbide tips.
Additionally, they have more lubricity and they are more resistant to corrosion.
Cutting materials suggested:
Mild low carbon steel
Stainless steel
High carbon steel
Solids and pipe
Advantages:
Lower cost per cut
Wide variety of tooth counts to accommodate your part
Stiff and extremely flat plates ensure distortion-free accurate cuts
Increased productivity (less downtime)
Excellent cut quality
| Diameter | Kerf | Body thickness | Center hole |
| 250mm | 2.0 | 1.7 | 32/40 |
| 250mm | 2.0 | 1.7 | 32/40 |
| 250mm | 2.0 | 1.7 | 32/40 |
| 250mm | 2.0 | 1.7 | 32/40 |
| 260mm | 2.0 | 1.7 | 32/40 |
| 285mm | 2.0 | 1.7 | 32/40 |
| 285mm | 2.0 | 1.7 | 32/40 |
| 285mm | 2.0 | 1.7 | 32/40 |
| 285mm | 2.0 | 1.7 | 32/40 |
| 285mm | 2.0 | 1.7 | 32/40 |
| 285mm | 2.0 | 1.7 | 32/40 |
| 315mm | 2.3 | 2.0 | 32/40 |
| 360mm | 2.6 | 2.3 | 40/50 |
| 360mm | 2.6 | 2.3 | 40/50 |
| 360mm | 2.6 | 2.3 | 40/50 |
| 360mm | 2.6 | 2.3 | 40/50 |
| 420mm | 2.7 | 2.3 | 50 |
| 420mm | 2.7 | 2.3 | 50 |
| 420mm | 2.7 | 2.3 | 50 |
| 425mm | 2.7 | 2.3 | 50 |
| 425mm | 2.7 | 2.3 | 50 |
| 460mm | 2.7 | 2.3/2.9 | 40/50 |
| 460mm | 2.7 | 2.3/2.9 | 40/50 |
| 460mm | 2.7 | 2.3/2.9 | 40/50 |
| 580mm | 3.2 | 2.6/2.9 | 50/80 |
| 580mm | 3.2 | 2.6/2.9 | 50/80 |
| 580mm | 3.2 | 2.6/2.9 | 50/80 |
