1400C Slide-Able Heating Cooling Tube FurnaceSlide-able tube
furnace with 3"IDx55" L quartz tube and flanges and a maximum
working temperature up to 1350°C. One pair of sliding rail is
installed on bottom of furnace to allow sliding the furnace from
one side to another to achieve max. heating and cooling rates up to
For fastest heating, the furnace may be pre-heated to a desired
temperature and then be slided to the sample's position. As for
fastest cooling, the furnace can be slided to another side after
sample heating is completed. Moreover, the heating and cooling
rates may reach 15°C/s under vacuum or inert gases.
This furnace provides an alternative for rapid thermal processing
at the lowest cost.Double layer steel structure with dual air
cooling fansOne pair of sliding rails are installed on bottom of
furnace, which allows furnace to be manually moved from side to
sideVacuum flanges and a digital vacuum gauge are installed for
Slding rail length is about 1200mm, the furnace can slide 600 mm
distance Power2.5KWVoltageAC 208-240V Single Phase, 50/60 HzMax.
Temperature1400°C (<1 hour)Continuous
Temperature1350°CHeating& Cooling Rates Heating Rate:15°C/sec
(RT - 150°C);10°C/sec (150°C - 250°C); 7°C/sec (250°C - 350°C);
4°C/sec (350°C - 500°C); 3°C/sec (350°C - 550°C); 2°C/sec (550°C -
650°C); 1°C/sec (650°C - 800°C); 0.
5°C/sec (800°C - 1000°C);Cooling Rate:15°C/sec (1000 -
950°C);10°C/sec (950°C - 900°C);7°C/sec (900°C - 850°C);4°C/sec
(850°C - 750°C);2°C/sec (750°C - 600°C);1.5°C/sec (600°C -
500°C);1°C/sec (500°C - 400°C);0.5°C/sec (400°C - 300°C);Note:The
max heating and cooling rate is achieved by pre-heat one side of
processing tube to the target temperature and then slide the
furnace to the other side.
You may choose to place the sample in the pre-heat area or
not.Heating Zone Length440mm ( single zone )Constant Temperature
Zone120mm (+/-1°C @ 400-1200°C)Heating ElementsFe-Cr-Al Alloy doped
by MoProcessing Tube SizeHigh purity fused quartz tubeSizeOD: 3.2"
x ID: 3.0" x Length: 55" (inch)or OD80 x ID 75 x Length 1400 (
mm)Two foam ceramic blocks are included which must be placed inside
tube to avoid heat radiation damaging O-ringTemperature
ControllerPID automatic control with 30 programmable segments for
precise control of heating rate, cooling rate and dwell time.
Temperature Accuracy+/ - 1°CVacuum FlangesStainless steel vacuum
flanges are installed on both ends of tube with heavy duty
support.Right flangeKF-25 pump connector and needle valve.Left
flange: one needle valve and 1/4" thermocouple feed-through and
digital vacuum gauge.An 24" length x 1/4" dia. K type thermocouple
(included) connected to an Omega temperature calibrator (included)
will be inserted through this flange to monitor the heating and
cooling rates of the sample's position during furnace sliding.
Vacuum LevelLimited by pump ( pump is not included, click on
pictures to order )10E-5 torr can be reached by molecular pump10E-2
torr by mechanical pump.Sliding Rails / TableDouble sliding rail
made by Cr plated steelSliding length: 1200 mmDimensions550 x 380 x
520 mm ( furnace only)1500 x 380 x 620 mm ( furnace + sliding )Net
Weight~ 100 KgShipping Package Size70" x 45" x 45" (inch)Shipping
Weight350 lbsWarrantyOne year limited manufacturer's warranty
(Consumable parts such as processing tubes, O-rings and heating
elements are not covered by the warranty, please order replacements
at related products below).