Active Member
|
[China]
Address: Room 113, No.159, ShuiNan Road, Fenkou Town,Chun'An County,HZ,CN
Contact name:Darren
Hangzhou Yobang import and Export Co., Ltd. |
|
|
New spider man helmet dult|Downhill|Mountain Bike|BMX|Full Face D4 Carbon Helmet
| Name: | helmet and Protective Gear |
| Size: | S/M/L |
| Material: | ABS+EPS |
DETAILS:
INFORMATION:
Are there helmets that I can wear for more than one activity?
Yes, but only a few. For example, you can wear a CPSC-compliant
bicycle helmet while bicycling, recreational in-line skating or
roller skating, or riding a kick scooter. Look at the table in this
pamphlet for other activities that may share a common helmet.
Are there any activities for which one should not wear a helmet?
Yes. Children should not wear a helmet when playing on playgrounds
or climbing trees. If a child wears a helmet during these
activities, the helmet’s chin strap can get caught on the equipment
or tree branches and pose a risk of strangulation. The helmet may
also prevent a child’s head from moving through an opening that the
body can fit through, and entrap the child by his/her head.
How can I tell if my helmet fits properly?
A helmet should be both comfortable and snug. Be sure that the
helmet is worn so that it is level on your head—not tilted back on
the top of your head or pulled too low over your forehead. Once on
your head, the helmet should not move in any direction,
back-to-front or side-to-side. For helmets with a chin strap, be
sure the chin strap is securely fastened so that the helmet doesn’t
move or fall off during a fall or collision.
If you buy a helmet for a child, bring the child with you so that the helmet can be tested for a good fit. Carefully examine the helmet and the accompanying instructions and safety literature.
What can I do if I have trouble fitting the helmet?
Depending on the type of helmet, you may have to apply the foam
padding that comes with the helmet, adjust the straps, adjust the
air bladders, or make other adjustments specified by the
manufacturer. If these adjustments do not work, consult with the
store where you bought the helmet or with the helmet manufacturer.
Do not add extra padding or parts, or make any adjustments that are
not specifically outlined in the manufacturer’s instructions. Do
not wear a helmet that does not fit correctly.
Will I need to replace a helmet after an impact?
That depends on the severity of the impact and whether the helmet
was designed to withstand one impact (a single-impact helmet) or
more than one impact (a multiple-impact helmet). For example,
bicycle helmets are designed to protect against the impact from
just a single fall, such as a bicyclist’s fall onto the pavement.
The foam material in the helmet will crush to absorb the impact
energy during a fall or collision. The materials will not protect
you again from an additional impact. Even if there are no visible
signs of damage to the helmet, you must replace it after such an
event.
Other helmets are designed to protect against multiple impacts. Two examples are football and ice hockey helmets. These helmets are designed to withstand multiple impacts of the type associated with the respective activities. However, you may still have to replace the helmet after one severe impact if the helmet has visible signs of damage, such as a cracked shell or permanent dent in the shell or liner. Consult the manufacturer’s instructions or certification stickers on the helmet for guidance on when the helmet should be replaced.
How long are helmets supposed to last?
Follow the guidance provided by the manufacturer. In the absence of
such guidance, it may be prudent to replace your helmet within 5–10
years of purchase, a decision that can be based, at least in part,
on how much the helmet was used, how it was cared for, and where it
was stored. Cracks in the shell or liner, a loose shell, marks on
the liner, fading of the shell, evidence of crushed foam in the
liner, worn straps, and missing pads or other parts, are all
reasons to replace a helmet. Regular replacement may minimize any
reduced effectiveness that could result from degradation of
materials over time, and allow you to take advantage of recent
advances in helmet protection.
Where can I find specific information about which helmet to use?
Look at the information in columns 1−3 of the table below, and
follow these easy steps:
Find the activity of interest in the first column (1).
Read across the row to find the appropriate helmet type for that activity listed in the second column (2).
Once you’ve found the right helmet, look for a label or other marking stating that the helmet complies with an applicable standard listed in the third column (3).
heads up + helmeted = safer play!
FAQ:
Q: How should I submit artwork and what format?
A: You can submit artwork to us by Email or upload your artwork to our FTP.
We accept: COREL DRAW, ILLUSTRATOR, COREL PHOTO PAINT, PHOTOSHOP,
TIFF,. JPEG,. GIF (tiff at 300dpi, jpeg at 300dpi, gif at 600dpi 100%size)
PDF (vectors in PDF, if using raster program make sure you have high res at 100%size.)
Q: What are setup costs?
A: Set up costs most often apply to new graphics. The first time you order and have a two color print to it, we charge a one time
fee for two screen charges. If you are an existing customer and you want to a NEW graphic the same rules apply. Set up fee for
normal deck heat transfer graphic: USD160 unlimited colors. For longboard transferr graphic USD320 unlimited colors.
Q: Can I order samples?
A: Absolutely, we send requested samples at a minimum charge. You will have to pay shipping cost and samples fee,
the samples fee will return back to you after you place your order. New customers must email us the following information.
Company or shop name, Address, telephone No. specific boards.
Q:When is your delivery time?
A:It depends on product and order QTY.
Normally,it takes us 25 days after receiving the deposit,Repeat order only need 15-20 days.
Q: What is the loading port?
A: Regularlly Ningbo or Shanghai
Q: Do you provide OEM developing services?
A: Yes,we have plenty experience in OEM developing, aslo for famous brands,
