|
[China]
Trade Verify
Address: Room 517, 5th Floor, Building 10B, Zone 3, Shenzhen Bay Science and Technology Ecological Park, Gaoxin South Ring Road, Shenzhen High tech Industrial Park (South District), Nanshan District, Shenzhen
Contact name:Yao
Yaoan (Shenzhen) Electronic Technology Development Co., Ltd. |
|
Verified Suppliers
|
|
|
Factory Price LPG Gas Sensor With Gas Detection Control Panel LPG Detector
The YA-K210 gas alarm controller is a versatile product that can be compatible with our YA-D series gas detectors, combining to form an innovative and intelligent industrial gas control system. This industrial gas early warning system is explicitly designed for use in industrial environments, providing quick and accurate gas detection results to keep your workplace, people, and valuable assets safe.
The controller is equipped with a 7-inch industrial LCD screen that displays the concentration value of all the connected gas detectors. With branch line (4-20mA) or bus (485 bus) connections, up to 256 detectors can be connected to the controller. The controller also features low limit, high limit, fault, and shielding alarm functions. When an alarm is triggered, the controller sends an audible and visual signal to indicate the alarm location and records the alarm time automatically.
Each gas detector can set up two sets of output relays, which automatically drive connected equipment, including exhaust fans and solenoid valves. Besides, the recorded alarm information can be exported through a U disk for additional analysis and record-keeping. With two PC interfaces, the data can be conveniently queried and analyzed using a host computer.
The product is designed following national standards and is extensively tested to provide excellent performance, fast response, low failure rate, and easy maintenance. The system uses a wall-mounted installation and the detector's cooperation with the controller CPU to upload and process gas detector data, complete data display, and output control functions for optimal workplace safety.
The YA-K210 gas alarm controller host is equipped with an embedded microprocessor. This microprocessor comes with multiple functions that include detector signal sampling, real-time calculation of data, fault detection of the system, power management, display driver, and key scanning. The controller also comes with alarm display, fault display, shield display, data storage, data export, 4G networking, alarm peripheral driver, and other functions.
The intelligent system of the controller allows users to switch between μmol/mol and mg/m³ units. Additionally, the controller comes with 2 groups of common relays and 6 groups of programmable relays passive output. If necessary, the controller can also be connected to the external relay linkage module.
Another notable feature of the YA-K210 gas alarm controller host is its ability to support multiple communication methods. These methods include 4-20mA, RS485, LoRa, 4G, PC, and other communication methods that are popular in the industry.
The controller is designed to monitor the gas concentration level in real-time. When the gas concentration reaches or exceeds the pre-set alarm value, the controller sends out corresponding acoustic and optical alarm signals. Additionally, when the preset logic relationship is satisfied, the external device can act on its own. Furthermore, the external devices can be started directly through the controller.
The YA-K210 gas alarm controller host comes equipped with a record separation system. The system allows for fault, alarm, and automatic screening and separation of system records. The controller stores up to 2000 records that can be connected to the controller via the U disk export data. The power supply system uses 220V 50Hz AC, and the backup power uses two 12V/9Ah batteries.
| Power source |
|
| Power | ≤20W； |
| Output supply voltage | DC24V±25% |
| Matching detector model | YA-D series |
| Number of connected detectors |
|
| Indication mode |
|
| Alarm mode | Sound (sound pressure level at a distance of 1 meter above 70dB, 115dB below), light, voice broadcast alarm |
| Response time (T90) | ≤30 seconds |
| Contact output | Passive contact capacity 7A/250V, 8 on-board (Multiple expansion boards can be connected, and each expansion board supports 4 signals) |
| Explosion-proof mark | Non-explosion proof |
| Class of protection | IP30 |
| Working temperature and humidity | -20～50℃；<95%RH |
| weight | ≤10kg |
| Detector and controller cable requirements |
|
| Communication distance between detector and controller | ≤1200m |
| Output signal | 4-20mA, RS485, LoRa, 4G, PC |
| Installation mode | wall-mounted |
| Overall dimension | 590*380*140mm |
The Hazardous Gas Controller is a 4-20mA gas alarm controller that can also output signals through RS485. It has a DC24V±25% output supply voltage and can operate in a working environment with a temperature range of -20～50℃ and a humidity level of less than 95%RH. Its dimensions are 590*380*140mm, and it weighs no more than 10kg. The product comes with a 1-year warranty, and it supports a maximum of eight 4-20 mA inputs and 99 RS485 data inputs. It is recommended to use only the local power supply to connect no more than 12 sets at the same time. The matching detector model for this Combustible Gas Alarm Controller is the YA-D Detectors Series.
The YA-K210 Gas Alarm Controller is an essential component of a flammable gas monitor system. It is compatible with YAOAN's YA-D Detectors Series, which can detect various flammable gases such as methane, propane, and hydrogen. The controller supports a maximum of eight 4-20 MA inputs and 99 RS485 data inputs. However, it is recommended to use only the local power supply to connect no more than 12 sets at the same time to ensure stable performance.
The YA-K210 Gas Alarm Controller is widely used in different occasions and scenarios. It can be installed in residential kitchens, gas stations, chemical plants, and other industrial settings where flammable gases are present. The controller provides an early warning signal when it detects a gas leak, allowing users to take immediate action to prevent accidents.
One of the key features of the YA-K210 Gas Alarm Controller is its output signal. The controller supports both RS485 and 4-20mA output signals, making it compatible with various control systems. This feature ensures that the controller can be integrated with other safety devices and systems to provide a comprehensive gas leakage prevention system.
The YA-K210 Gas Alarm Controller is manufactured in Shandong, China, by YAOAN, a well-known brand in the gas safety industry. The product is designed to operate in a wide range of working environments, with a temperature range of -20～50℃ and <95%RH. This makes it suitable for use in different regions and climates.
Company profile
As a diversified group company, Shandong Yaoan Electronic Technology Development Co., Ltd. started to set foot in the field of gas detector in 2007, and has been deeply involved in the industry for over 16 years. we have a strong R&D team, as well as the OEM& ODM team, Our foreign company is located in Shenzhen. it takes only one hour to our airport, seaport or HK. We have around 10 oversea sales .So for different customers,we always provide with the best solutions. Covering 4 major sectors: gas detectors, gas analyzers,dust detectors, and air quality environment monitoring systems, we has over 10 branches and subsidiaries, 3 core brands Yaoan, Yaorui, Huantai.
Headquartered in Jinan(Shandong) Pilot Free Trade Zone, our production facility is over 6,000 square meters,Our products have obtained international explosion-proof certifications from ATEX,and CE,FCC,ROHS,SIL cetificatses,ensuring product quality, which are comparable to international brand like Honeywell, MSA, RAE, but our products with competitive price.
We have served more than 30,000 large and medium-sized Chinese enterprises like Sinopec, PetroChina, China Railway Group, Harbin Pharmaceutical Group, China Power Construction, etc. Besides, our products have been exported to many countries like USA, Germany, Brazil, South Korea, Russia, Italy, Japan, Korea, etc.
Here are some frequently asked questions about the YAOAN Gas Alarm Controller YA-K210:
Q: What gases can the YA-K210 detect?
A: The YA-K210 can detect a variety of gases including carbon monoxide, natural gas, propane, and methane.
Q: How many gas sensors does the YA-K210 support?
A: The YA-K210 supports up to 4 gas sensors.
Q: What is the operating voltage range for the YA-K210?
A: The YA-K210 operates on 12-24V DC.
Q: Is the YA-K210 easy to install?
A: Yes, the YA-K210 is designed for easy installation and comes with mounting hardware and instructions.
Q: Where is the YAOAN Gas Alarm Controller made?
A: The YAOAN Gas Alarm Controller YA-K210 is made in Shandong, China.
