|
[China]
Trade Verify
Address: Tianfu Village Feidong County Hefei City Anhui Province
Contact name:Lynn
Xinrui International Trading Co., Ltd |
|
Verified Suppliers
|
|
|
XGC55T telescopic crawler crane
Main parameters:
Max. rated total lifting capacity:55T
Main boom length:13-52M
Fixed jib length:7-16M
Main configuration:
*Engine:SC7H210(155kw)
* Wire rope
* Hirschmann PAT
*Heater
*Full dimension cab
The XGC55 crawler crane is a new generation of crawler crane product successfully developed by XCMG following QUY55 crawler crane.
While inheriting the advantages of the old products, the new generation pays more attention to improving the performance, operating efficiency, convenience for disassembly and transportation, and comfort of operation. The system is mature and reliable, and the safety devices are complete.
It is equipped with a self-erecting function, main winch quick release function, one key switch function, an engine cold start device, a winch monitoring system, a hydraulic high-pressure bypass filter system, and an electronic level gauge, anti-lightning system, travel commutation function, the main boom catwalk and other advanced technology, all aspects of performance are superior to the domestic counterparts.
The first domestic crawler crane to use pilot proportional control technology.The lifting performance is in the advanced level in same domestic industry.
The patented logic integrated control valve is used to control brake opening and closing, and brake control pressure is from main oil circuit, which make a more safe and reliable work.
The main system uses overall power variable pump control and the main and auxiliary winch can respectively choose double-pump coflow mode to improve working efficiency.
The main crane actions use advanced hydraulic proportional control technology. Operator can control the each mechanism moving direction and speed by operating the hydraulic control handles, with infinitely variable speeds and good fine motions.
| Items | Unit | Parameter value |
| Performance parameters | * | |
| Max. rated lifting load of main boom | (t) | 55 |
| Max. rated lifting load of fixed jib | (t) | 11.4 |
| Max. rated lifting load of luffing jib | (t) | — |
| Max. lifting load moment | (t.m) | 203.5 |
| Max. lifting load of tower jib | (t) | — |
| Max. rated lifting load of boom single pulley | (t) | 6 |
| Max. rated lifting load of special jib | (t) | — |
| Size | * | |
| Main boom length | (m) | 13~52 |
| Main boom luffing angle | (°) | -3~80 |
| Fixed jib length | (m) | 7~16 |
| Tower jib length | (m) | — |
| Max. size of single unit for transport (L×W×H) | (m) | 12.04×3.45×3.36 |
| Installation angle of fixed jib | (°) | 10,30 |
| Special jib length | (m) | — |
| Speed | * | |
| Max. single line speed of hoist system | (m/min) | 125 |
| Max. single line speed of main luffing system | (m/min) | 87/78 |
| Max. single line speed of jib luffing system | (m/min) | — |
| Max. slewing speed | (r/min) | 2.45/2.2 |
| Max. travel speed | (km/h) | 1.37/1.22 |
| Gradeability | (%) | 30 |
| Average ground pressure | (MPa) | 0.06 |
| Max. single line speed of tower jib luffing system | (m/min) | — |
| Max. single line speed of SL luffing system | (m/min) | — |
| Engine | * | |
| Model | - | SC7H210.1G3/QSB6.7 |
| Engine power | (kW) | 155/153 |
| Emission | - | National III stage/Europe III |
| Mass | * | |
| Crane overall mass | (t) | 46.3(Main hook,13m boom) |
| Max. weight of single unit for transport | (t) | 28.6 |
