Home Companies Xiamen Whaleflo Industry and Trade Co.,Ltd.

Whaleflo 12V FLO-2202A 80PSI 4LPM mini electric High Flow water pump/ Driving House pump

Xiamen Whaleflo Industry and Trade Co.,Ltd.
Active Member

Contact Us

[China] country

Address: Room 313,No.185-3 Qianqiuye Business Centre,Jintai Road,Huli district,Xiamen,China.

Contact name:Chen

Inquir Now

Xiamen Whaleflo Industry and Trade Co.,Ltd.

Whaleflo 12V FLO-2202A 80PSI 4LPM mini electric High Flow water pump/ Driving House pump

Country/Region china
City & Province xiamen fujian
Categories Pumps
InquireNow

Product Details

WATER SPRAYER PUMP RV 12 VOLTS WATER PUMP

 

It can be used for low flow rate while high pressure requirements in situation as:
Pressure pumps used in sprayers and spray fixtures.
Water purification, filter machine , chemical metering and fluid supply.
Food, Beverage filling and transfer.
Ex .pressure switch control pump's working or not, turn on switch, pump is at working;
turn off switch with pump stop working,
So, it is special suitable for sprayers and spray fixtures with its low flow rate.

-11_03.jpg

 

MotorPumpMaterial of ContructionWeight & Size
Type: 12V/24V DC,
Permanent magnet,
totally
Type:2-chamber
positive displacement
Motor Housing: PA66Dimension:18.5*11*6.5cm
Enclosed,
non-ventilated
Liquid Temperature:
140ºF(60°C)Maximum
Pump Housing: PolypropyleneNet weight:0.67kgs
Leads:16 AWGPriming Capabilities:
3feet(0.9m)suction lift
Valves: Viton or EPDMPacking:50pcs/CTN
Duty cycle:
Work intermittent
Pump able to run dry
without damage
Diaphragm: SantopreneCtn size:58*37*37cm
 CHECK VALVE:
(1-Way Operation)
Prevents Reverse Flow
Ports Size: 3/8'' Hose BarbN.W.:34kgs, G.W.:36kgs
 

-11_07.jpg

 

ModelVoltFlow
LPM(GPM)
Pressure
PSI(BAR)
Amp Draw(A)BYPASS
FLO-2201122(0.52)55(3.79)1.8YES
FLO-2202123.8(1.0)35(2.41)3YES
FLO-2202124.3(1.13)35(2.41)3.5YES
FLO-2203122.6(0.68)70(4.83)2.1YES
FLO-2203-1123.1(0.82)70(4.83)2.2YES
FLO-2202A124(1.05)80(5.52)2.6YES
FLO-2401242(0.53)55(3.79)0.9YES
FLO-2402243.8(1.0)35(2.41)1.5YES
FLO-2403242.6(0.68)70(4.83)1YES
FLO-2402A244(1.05)80(5.52)1.3YES

 

 

-11_12.jpg

 

1. Do not use this product beyond the limit specified in this specification, when useing the brushless motor be noted that the input power should be constant pressure, filtering..

 

2.Keep the import eara and export eara clean and smooth , no solid particles, may contain a small amount of water, not so solid foreign objects into the pump body, in the non-clean air in and out of the installation of air intake filters.

 

3.The specification of this product is only for your reference,the details should check the real products,spcific and be made according to customers’request within the permitted range.

 

4.non-professional person should not open this product.

 

 

 

Each valve chamber has a diaphragm behind it in the lower pump housing. As the motor shaft turns,

an internal cam positioned behind the diaphragms causes the diaphragms to be pushed forward, then

back in a continuous sequence creating a suction. As this suction builds, fluid is pulled hrough the inlet,

through the various valve chamber check valves to the outlet he volume of flow is determined by several

factors including: the number and size of the pump chambers,cam offset, operating pressure, fluid viscosity.

 

 

 

 

PRODUCT DESCRIPTION

FLO Series Industrial Pumps are designed for a wide range of application and are constructed from a selection of material suitable for handling a broad range of chemicals.The FLO Series of diaphragm pumps are self-priming and can be run constinously for short periods of time. The higher the duty cycle the shorter the expected life of the pump.

Typical pump uses are liquid transfer,spraying, circulation, filtration and dispensing.

DESCRIPTION

1.Switch cover screws 2.Pump head screw 3.Pump head

4. Motor 5.Lead Wires 6.Pressure

Operation

To start and prime the pump, the discharge line must be open allowing trapped air to escape thus avoiding the potential of airlock.The pressure switch will shut off the pump qutomatically when the discharge valve is closed the pressure has risen to the switch OFF set point.The pressure switch will restart the pump of the pressure switch.

Demand Operation(intermittent duty)

Demand Operation is considered and "intermittent duty" application.The maximum intermittent duty cycle is that switch will cause the motor to reach its maximum themal limits.Once the maximum themal limit is reached, the motor must be allowed to settle to a lower temperature ideally being ambient before resuming operation.Running the pump

at or near the maximum thermal limited for extended period of time will shorten the life of the pump and may result in immediate pump failure.

Bypass Operation(if equipped)

Models equipped with an external bypass system are designed to pump at high pressure while at low or high flow rates.Models equipped with a bypass only will continue to run until the power is manually turned off.

The FLO pumps are not recommended for continous duty service due to limited motor brush life.Operation at lower pressure and temperatures.However, will extend overall pump service life.

Mounting

The FLO Series pumps are self-priming.Vertical prime ay vary depending on the fluid viscosity, suction tube size, foot valve and pump configuration.The pump should be mounted in a dry and adequately ventilate area.If mounted within an enclosure,provisions to coor the motor may be necessary.

Preventative Maintenance Tips

If pumping a liquid other than water the pump should be flushed with water(if applicable) after each use.

Before freezing conditions occur, the pump must be liquid free or winterize with proper anti-freezing chemicals.

Dimensional Drawing of mini water pump

TECHNICAL DATA

Technical Data:

ModelVoltFlow(L/Min)Pressure(PSI)Amp Draw(A)
FLO-2201122551.8
FLO-2202123.8353
FLO-2202-1124.3353.5
FLO-2203122.6702.1
FLO-2203-1123.1702.2
FLO-2202A124802.6
FLO-2401242550.9
FLO-2402243.8351.5
FLO-2403242.6701
FLO-2402A244801.3
Inlets size:3/8''hose barb, thread
Outlets size:3/8''hose barb, thread
dimension/pc:18.5x11x6.5cm
Net weight/pc:0.64kg
Gross weight/pc:0.72kg
Carton dimension(50pcs):56.5x38.5x36.5cm

 

 

Sample order is very welcome to have a test, if need more technical specification, pls send email to us !

Hot Products

Whalelfo Plastic 70M maximum lift 24 volt 6Lpm 4.0A Submersible Water Deep Well Pump For Irrigation ...
Whaleflo Household 12V 24V Dc Submersible Pump Mini Solar Energy Electric Water Pump Deep Well Mute ...
Whaleflo WEL2460-30 24V 12LPM Max Lift 100 M 5.0 A DC Solar Powered Submersible Water Pump System ...
Whaleflo WEL1260-30 12V DC 10A 12LPM Max lift 100M Price Solar Water Pump System For Agriculture ...
Whaleflo Farmland Irrigation Stainless Steel Solar Pump 250W 5ton/Hour Solar DC Irrigation Water ...
The solution to your remote water pumping needs. This pump is rugged.durable and builtto last. This ...