|
[China]
Trade Verify
Address: Room 4916, Floor 49, South Tower of Greenland Center, East Zhengzhou district, Zhengzhou, China
Contact name:Linda Yang
Zhenglan Cable Technology Co., Ltd |
|
Verified Suppliers
|
|
|
H05VVH-U twin core PVC Insulated PVC sheathed Cable without earth wire
PVC sheathed Cable Application :
electrical appliances, instrument and telecommunication device with
rated voltage up to and including 300/500V. Maximum temperature
allowance when the cables are for long term use: temperature shall
not exceed 70°C.
PVC sheathed Cable Construction:
Core number: 2core, 3core
Conductor: Solid or Stranded Annealed copper/ aluminum
Insulation: PVC insulation
Outer sheath: PVC sheath.
Rated voltage: 300/500V
Test voltage: 2000V
Physical characteristics
Max working temperature: 70°C
Mounting temperature: 0°C-+40°C
Minimum bending radius:
For cable with diameter below 25mm, allowed bending
radius should not be less than 4D;
For cable with diameter above and including 25mm,
allowed bending radius should not be less than 6D;
Standard: IEC227-4 or JB/T8734.2-2016
Packing: 100m per roll (per coil or plastic reel, as your request)
Remarks: Flame retardant, fire resistance (adopt mica tape), low smoking and Halogen free, or other property are available.
ZR cable (flame retardant cable) is the kind of cable with PVC insulation built mixed with fire prevention additive to make it have the capability of preventing or retarding flame spread during combustion.
There are 3 grades of fire prevention available which are
Grade A It is the highest level of flame retardancy. That is, the insulation material, filling rope, fastening (inner cushion) belt/layer and sheath material used in cables are all flame retardant materials.
Grade B Except the insulation material, all other materials are flame retardant.
Grade C Only the sheath material is flame retardant
NH cable(fire resistant cable) is the kind of cable built with a layer of mica tape. Even if the plastic skin is burnt out, refractory layer will help not cause short circuit. When wiring, cut off the refractory layer at the wire head.
LSZH,LSOH,LS0H,LSFH or OHLS cable(Low smoke zero halogen cable)is cable with insulation or outer sheath built using low smoke zero halogen free material to help reduce toxic and corrosive gases produced during combustion.
Termite-proof cable is the cable built with insulation or outer sheath mixed with a kind of materials to prevent termite biting the cable.
PVC sheathed Cable Technical Sheet:
| Nom. Cross Section Area (mm²) | Approx O.D mm | Thickness of insulation | Thickness of sheath | 20℃max. Conductor resistance (Ω/km) | 70℃min. Insulation resistance(mΩ/km) |
| 2×0.75 | 4.6×7.1 | 0.6 | 0.9 | 24.5 | 0.013 |
| 2×1.0 | 4.8×7.4 | 0.6 | 0.9 | 18.1 | 0.012 |
| 2×1.5 | 5.3×8.5 | 0.7 | 0.9 | 12.1 | 0.012 |
| 2×2.5 | 6.2×10.1 | 0.8 | 1.0 | 7.41 | 0.010 |
| 2×4.0 | 6.7×11.1 | 0.8 | 1.0 | 4.61 | 0.0087 |
| 2×4.0 | 6.9×11.5 | 0.8 | 1.0 | 4.61 | 0.0083 |
| 2×6.0 | 7.5×12.5 | 0.8 | 1.1 | 3.08 | 0.0074 |
| 2×6.0 | 7.8×13.0 | 0.8 | 1.1 | 3.08 | 0.0070 |
| 2×10.0 | 9.5×16.2 | 1.0 | 1.2 | 1.83 | 0.0067 |
| 3×0.75 | 4.6×9.6 | 0.6 | 0.9 | 24.5 | 0.0013 |
| 3×1.0 | 4.8×10.1 | 0.6 | 0.9 | 18.1 | 0.0012 |
| 3×1.5 | 5.3×11.7 | 0.7 | 0.9 | 12.1 | 0.0011 |
| 3×2.5 | 6.2×14 | 0.8 | 1.0 | 7.41 | 0.0010 |
| 3×4.0 | 7.0×15.8 | 0.8 | 1.0 | 4.61 | 0.0087 |
| 3×4.0 | 7.1×16.3 | 0.8 | 1.0 | 4.61 | 0.0083 |
| 3×6.0 | 7.5×17.5 | 0.8 | 1.1 | 3.08 | 0.0074 |
| 3×6.0 | 7.8×18.2 | 0.8 | 1.1 | 3.08 | 0.0070 |
| 3×10.0 | 9.5×23 | 0.8 | 1.2 | 1.83 | 0.0067 |
FAQ
1.What is your quality control?
-Quality is our soul and culture.We have 100%strict inspection and
testing before shipment.We will return the money to you if there is
quality problem.
2.Can you accept small order?
-Yes,small order is available in our company.We support new project
of our customers as we know business is always from small to big.
Your sucess is my business.
3.Can I order samples before placing the bulk order?
-Yes,samples is certainly for your test before the bulk order.It is
normal process,we always deal with other clients.
However,we will charge for a small amount of deposit in case the
investment on new samples.But please donot worry,the sample deposit
will refund to you when bulk order fixed.
4.What is the lead time for samples?
-About sample making,it usually takes 7-15days include testing to
make sure its excellent.
If urgently,please kindly let us know,we will do our best to work
overtime to speed up it.
5.Can you supply customized products and logo?
-Yes,of course we can.We supply OEM&ODM service.You can send us
your drawing.
You have the idea,we turn it into excellent product for you.
