Home Companies Qingdao Yilan Cable Co., Ltd.

25mm2 Flexible 3M 350A Co2 Mig Welding Torch Cable

Contact Us

[China]

Trade Verify

Address: East of Ping'an Avenue, Jiaoxi Town, Jiaozhou City, Shandong Province

Contact name:Aric

Qingdao Yilan Cable Co., Ltd.

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

25mm2 Flexible 3M 350A Co2 Mig Welding Torch Cable

Country/Region	china
City & Province	shandong
Categories	Power Cables

Product Details

3M Cable Length 350A Co2 Mig Welding Torch For Welding Machine

Description of welding torch cable

1.This Co2 Mig Welding Torch should be used by qualified personnel;

2.During use, avoid harmful substances such as arc or smoke, harming the operator and others;

3.The specified current parameter indicates its working limit, and the overload will damage the Co2 Mig Welding Torch;

4.The length of the conventional Co2 Mig Welding Torch is 3 meters and 5 meters. It is strictly forbidden to connect the cable with sharp objects, and heat objects.

5.MAG / MIG Co2 Mig Welding Torch technical implementation of GB/T15579.7-2013

NAME	MODEL	USAGE	FEATURE
Lightweight rubber cable	YQ,YQW	Household appliances, small electric equipment	Soft, light and good bending performance;
Lightweight rubber cable	YQ,YQW	Household appliances, small electric equipment	YQW has weather resistance and certain oil resistance
Medium-sized rubber cable	YZ,YZW	Industry, widely used in agricultural electrification	YZW has weather resistance and certain oil resistance
Heavy rubber cable	YC,YCW	Used in port machinery, searchlights, large-scale water conservancy irrigation and drainage stations, etc.	Has good versatility, complete series specifications, good performance and stability;
Heavy rubber cable	YC,YCW		YCW has weather resistance and certain oil resistance
Waterproof rubber cable	JHS,JHSB	Diving motor	Good bending performance, can withstand frequent movement
Welding machine rubber cable	YH,YHF	Electric welding machine	/
/	YHD	Tinned power cable for field use	/

6. In order to ensure the quality of welding and the service life of this product, it is recommended to check regularly and replace consumable parts in time;

7. Disassembly of wire feed hose:

First remove the nozzle, the contact tip, the front joint, and then at the end of the torch, remove the solid nut on the center plug, you can see the fixed end of the wire feed hose, pull out, if necessary, gently rotate, ie The wire feed hose can be removed;

8. Installation of wire feeding hose:

Before connecting the welding gun to the wire feeding mechanism, be sure to install the appropriate wire feeding hose according to the type of wire.

Note: The wire feed hose should not be too long, otherwise it will make the contact tip screwed into difficulty or the hose will be excessively compressed and bent in the cable.

9. The protective gas flow is an important factor affecting the use of the Co2 Mig Welding Torch. It can be adjusted to the best welding effect by adjusting the flow meter.

10. Splashes in the welding process are most to affect the Co2 Mig Welding Torch and the welding effect.

11. It is strictly forbidden to use the Co2 Mig Welding Torch as a tool for knocking the workpiece.

Application field

Secondary pressure welding leads in heavy or mining applications

AC power does not exceed 600 volts in power applications

Manufacturing Standards

IEC 60245 and China National Standard GB5013

We can also produce welding cables according to international general standards (such as ASTM, BS, DIN, NF and AS/NZ).

Technical parameters

Welding cable Standard: IEC 60245
Nominal section area	No./diameter of stranding	Nominal sheath thickness (mm)	Overall diameter		Max. conductor resistance at 20℃
(mm2)	(mm)		(mm)		(Ω/km)
			Min.	Max.	Without tinned	With tinned
10	322/0.20	1.8	7.5	9.7	1.91	1.95
16	513/0.20	2	9.2	11.5	1.16	1.19
25	798/0.20	2	10.5	13	0.758	0.78
35	1121/0.20	2	11.5	14.5	0.536	0.552
50	1596/0.20	2.2	13.5	17	0.379	0.39
70	2214/0.20	2.4	15	19.5	0.268	0.276
95	2297/0.20	2.6	17	22	0.198	0.204
120	1702/0.30	2.8	19	24	0.161	0.164
150	2135/0.30	3	21	27	0.129	0.132
185	1443/0.40	3.2	22	29	0.106	0.108
240	1908/0.40	3.8	25	35	0.0801	0.0817