BULLDOZER | 220 |
AWARDED THE ISO9001:2000 SYSTEM CERTIFICATE | |
SPECIFICATION | WORK EQUIPMENT |
Specification/Blade type
Straight-tilt
Angle U-Blade | Specification/Blade type
Straight-tilt
Angle U-Blade |
Operating Weight
(kg)
23400
23650 24500 | Blade Capacity
(m3)
6.4
4.8
7.5 |
Min.Ground Clearnce (mm)
405
405
405 | Blade Width X Height(mm) 3725×1315/4365×1055/3800×1343 |
Min.Turning Radius
(m)
3.3
3.3
3.3 | Max.Lift
(mm)
1210
1300
1210 |
Ground Pressure
(MPa)
0.077
0.077
0.073 | Max.Depth
(mm)
540
530
540 |
Track Gauge
(mm)
2000
2000
2000 | Max.tilt Adjustment (mm) ≥735 ≥500 ≥755 |
Max. Pulling Force
(KN)
202
202
202 | Pitch Adjustment ( °
)
55
53.5
55 |
Grade Ability
(°)
30
30
30 | Capability(m3/H)(Theoretical value 40m)330 /245/365 |
TRAVEL SPEED | Weight Of Blade
(kg)
3630
3850
4200 |
1st
2nd
3rd | COOLANT AND LUBRICANT CAPACITY |
Forward
(km)
0~3.6 0~6.5 0~11.2 | Fuel Tank Capacity
(L)....................................................................480 |
Reverse
(km)
0~4.3 0~7.7 0~13.2 | Hydraulic Tank Capacity
(L).............................................................110 |
ENGINE | Engine oil Capacity
(L).......................................................................45 |
Model & Type Cummins
NT855-C280S10 6-cylinder, In-line, 4-stroke-cycle,water-cooled
,overhead valve direct injection, turbocharged diesel | Torque Converter ,Transmission, Bevel Gear., Steering Clutch
Capacity
(L)...................................................................................122 |
Rated Revolution (rpm)
.............................................................. 1800 | Final Drive Capacity (L)
.............................................72(each side) |
Flywheel Horsepower (HP)
...........................................................220 | RIPPER(OPTIONAL) |
| Single
Ripper 3-ShankRipper |
Cylinder Number-BoreX Stroke (mm) ..................... 6-139.7X
152.4 | Max.Digging Depth (mm).............695......................................... 666 |
| Max.Lift(mm).................................520............................................555 |
Piston Displacement (L)
....................................................................14 | Shank Of Distance (mm)
.........../................................................1000 |
Min. Fuel Consumption
(g/kW.h).................................................. 212 | Weight (kg)....................................2453......................................
2495 |
Max.Torque (Nm/rpm)
........................................................ 1078/1250 | OVERALL DIMENSIONS |
Starting Method........................................Starting
motor 24V 11kW | Straight-tilt Blade Dimensions |
POWER TRANSMISSION SYSTEM |
Note: Materials and specifications are subject to change without
notice. |
|
Torque Converter ............................
3-element,1-stage,1-phase |
Transmission Planetary gearing, hand-manipulated,
hydraulic shift, forced lubrication,3 forward and 3 reverse speeds |
Bevel Gear.........Spiral bevel gear, splash lubrication,
single-stage speed reduction |
Steering Clutch................................. Wet, multi-disc,
spring loaded, hydraulically separated, hydraulic control |
Steering Brake ...... Wet,floating, direct on-off hydraulic
inter-linking operation |
Final Drive .............Double reduction of spur gear,
splash lubrication |
HYDRAULIC SYSTEM |
Pump Type............................................ Gear pump
074444-66103 |
Working Pressure
(MPa)...............................................................14 |
System Discharge (L/min)…..........262(at revolution of 1800rpm) |
Working Cylinder type...........................Double-acting
piston type |
Working Cylinder Lift Number-BoreXRodXStroke (mm).............. 2-120X70X1043 |
Working Cylinder Tilt BoreXRodXStroke (mm) 200X90X130 |
UNDERCARRIAGE SYSTEM |
Type ................ Swing type of sprayed beam, suspended
structure of equalizer bar |
Carrier
Rollers..................................................................2(each side) |
Track Rollers.........6/each side (4-single flange, 2-double flange) |
Track Type............................. Sealed, assembled single-
grouser |
Number Of Track
Shoes............................................... 38(each side) |
Width Of Track Shoes (mm)
.......................................................... 560 |
Pitch (mm)
.......................................................................................
216 |
Length Of Track 0n Ground
(mm)...............................................2730 |