Electric Hydraulic Simple Car Parking Lift In Pit For Two Cars 4-5ton

Pit Type 2 Floors Car Parking Lift

Features

• Simple operation, economic and practical design, 1 parking space for 2 cars
• Pit type stacker, can be used in household or office building parking lot.
• Sharing post design, space saving, economic and more steady.
• No steel structure above ground, simple and graceful.
• The upper and lower space are fixed together, normally, the system lower to the pit, you can park car on upper space.
• Directly or rise the system to park the car on lower space.
• Multiple safety protection device.
• Optional hydraulic oil cylinder or motor & chain driven mode.
• Wave plate or diamond plate, are optional, you can choose hot galvanizing, electroplating or powder spray.
• Mold machining through the whole process.
• Pass 120% capacity dynamic load text and 150% static load test.
• Italian oil seal to make sure no oil leakage.
• Optional ultrared rays alarm device, in case of unguarded entrance.

Technical Parameters

• The standard depth of pit is 2.5 meters, and the load of each layer is 2-2.5 tons
• The parking height/width of floor B1 is 1.8m/ 2.1m.
• Overall size: 5400*2850*2500mm;
• Vehicle on floor B1 warm in winter and cool in summer, anti-theft and anti-rain&snow, vehicle on floor 1 free access, intelligent and practical;
• Meet CE standard voltage system, button operating system, voltage: 380V, the foundation shall be constructed according to the requirements of the manufacturer;
• Motor power: 3.7kw;
• Rise time approx 40s, Fall time approx 35s;
• Process: shot blasting spray/non-spray paint treatment;
• Space height requirement: 3.6 m;

More Models for Optional