Home Companies Wuxi Isaac Industry Co., Ltd.

High transparent electrostatic film for acrylic/PMMA

Active Member

Contact Us

[China]

Address: 221# Nuoka Garden Xinming Road, Wuxi, Jiangsu, China 214000

Contact name:Ruby

Country/Region	china
City & Province	wuxi jiangsu

Three-layer co-extrusion is the mode of production for electrostatic film. No matter how many layers,

the production method is the same. The difference is that how much raw material is used. Isaac

electrostatic film is with high transparency and good stretchability. 100% virgin granules are melt

and blown into protective film with uniform color and good stretchability but without crystal point.

Specification of high transparent electrostatic film for acrylic/PMMA:

Material: PE
Usage: for industrial usage. To protect acrylic, glass, high gloss plastic and so on.
Thickness: 0.03-0.15mm
Width: Within 1850mm
Length per roll: 4000m
Stretchability: Strong
Production process: three-layer co-extrusion
Color: transparent and colorful.
Temperature resistance: Can resist temperature of above 100℃ without deformation or turning yellow.

Characteristics of raw material:

Raw material of electrostatic film is PE, which is a polymer organic compound with the simplest structure.

It is widely used on market.

Usage of high transparent electrostatic film for acrylic/PMMA:

Acrylic is a kind of chemical material with a chemical name of PMMA. It is product with high gloss surface

which looks very similar to glass, but it is not entirely glass. On market, many people call it organic glass.

Acrylic is a perfect substitute of organic glass. Currently acrylic can be used to make light box, aluminum

plastic composite panel and so on. It has good light transmission, pure and rich colors, good appearance,

long service life and so on. But the hardness of acrylic surface is low, so it can be damaged easily.

Because of special surface, so all manufacturers emphasize the surface protection during production,

packaging and transportation So protective film is very important in acrylic industry.

Requirement for electrostatic protective film in acrylic industry is particularly high. No crystal points, no

snowflake, no white smog, easy to apply and remove. Acrylic itself is non-toxic material, so its protective

film must be non-toxic, too. PE, short for polyethylene, is non-toxic, so it is widely used to produce

electrostatic protective film.

Classification of protective film:

1, Traditional protective films.

For example, galvanized steel sheet protective film, color steel sheet protective film, glass protective

film, plastic sheet protective film and so on. These traditional protective films are with low added value.

The requirement for properties and crystal points control is low. And they are mainly protective films

coated with adhesive.

2, Protective film for flat panel display.

It is mainly used to protect flat panel display, glass substrates and various kinds of optical modules,

such as polarizing plate, color filter and so on. Such protective film has very high requirement for

viscosity and crystal point control. Application of electrostatic protective film is with high added value

for high technical products.

3, Electrostatic protective film for high tech electronics industry.

These electrostatic protective films normally should be produced in dust free room and the requirement

for crystal points control is very strict. Only a few protective film manufacturers have enough technical

ability to meet these requirement.

Product Model	Adsorption on glass surface	Main surfaces to protect
ISCE-14	1g/25mm	Various kinds of plastic sheets
ISCE-50-70A	3-4g/25mm	Glass lens and high light surfaces, can resist temperature of 70 degree C
ISCE-50-70B	6-7g/25mm	PET electroplate, can resist temperature of 70 degree C
ISCE-50-70C	8-10g/25mm	High light plastic or smooth surface, can resist temperature of 70 degree C
ISCE-30-70A	4-5g/25mm	Various kind of stamped plastic boxes surface, can resist temperature of 70 degree C
ISCE-30-70B	7-8g/25mm	Various kind of stamped plastic boxes surface, can resist temperature of 70 degree C
ISCE-50-50	100-200g/25mm	Color coated plate, aluminum composite panel and etc. can resist temperature of 50 degree C
ISCE-50-150	10-15g/25mm	High light surface, can resist temperature of 150 degree C
ISCE-40-130	30-40g/25mm	Plastic sheet laminating and punching forming under high temperature, can resist temperature of 130 degree C
ISCE-50-100B	100-150g/25mm	Special products that are difficult to stick. can resist temperature of 100 degree C
ISCE-50-100A	30-50g/25mm	Special products that are difficult to stick. can resist temperature of 100 degree C