1. General Description:
Consisting of high pressure gear pump, DC motor, multi-functional
manifold, valves and tank.
This power unit has been widely used in the industry of logistic
devices such as fork lift, mini lift table and scissors lift.
The lowering movement is controllde by the solenoid valve with the
lowering speed controlled by adjustable throttle valve.
5. Special notes:
1. The power unit is of S3 duty, which can only be worked
intermittentiy, ie., 1minute on and 9 minutes off.
2. Clean all the hydraulic parts concerned before mounting the
3. The viscosity of the oil should be 15~68 cst.
4. Change the oil after the first 100 hours of using the power
unit, then change the oil every 3000 hours.
5. The power unit should be mounted horizontally.