Home Companies Beijing Worldia Diamond Tools Co., Ltd.

1N 3N Tips TP Type Chip Breaking Inserts PCD Diamond Inserts

Contact Us

[China]

Trade Verify

Address: Room H-02, 5F, M7 Building, No.1 Jiuxianqiao East Road, Chaoyang District, Beijing, China 100015

Contact name:Nina

Beijing Worldia Diamond Tools Co., Ltd.

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

1N 3N Tips TP Type Chip Breaking Inserts PCD Diamond Inserts

Country/Region	china
City & Province	beijing beijing
Categories	Tool Parts

Product Details

TP Type PCD Chip-breaker Insert - 80° for non-ferrous materials machining

WORLDIA

WORLDIA pays special attention to the making of Standard Super Hard Cutting Tools.

And we have made a tremendous amount of technical innovations in the design and manufacturing

of PCBN/PCD/CVD inserts and related products.

DESCRIPTION

Normally there are two types of chip breakers in the market, one is a narrow groove with a

big positive angle for finishing; another one is a wide groove with a small positive angle

for roughing. Worldia integrates both together for multi-application with a new design

of disparity groove with a positive angle, this type can be used for both finishing and roughing,

meanwhile, this insert can be shifted with higher cutting performance and efficiency.

APPLICATIONS

PCD tools are limited to non-ferrous materials, such as high-silicon aluminum, metal matrix

composites (MMC), and carbon fiber reinforced plastics (CFRP).
PCD with flood coolant can also be used in titanium super-finishing applications.

MATERIAL INTRODUCTION

Poly-Crystalline Diamond (PCD)

1. Reduce your tooling cost significantly

2. For non-ferrous metal machining

According to grain size and features of a diamond, four types of PCD material,
i.e PD01E / PD10E / PD32E / CVDD are listed as below.

Material	Grain size	Features	Application
PD01E	1	PD01E fine grain size PCD material(1μm) is suitable for finishing applications. Its high impact resistance and high abrasive resistance are no less than that of a rough grade of PCD.	PD01E has excellent chip resistance and is suitable for roughing and interrupting cutting aluminum alloys. This grade is also commonly used for non-ferrous finishing applications. Other successful applications include machining of wood and MDF.
PD10E	10	PD10E is the universal grade in the market. It`s the first choice for many applications where a good balance of toughness and wear resistance are required.	This Grade is commonly used for non-ferrous finishing applications. Other successful applications include machining of wood and MDF.The machining of low-medium content silicon aluminum alloys, carbide, hard rubber, graphite, and so on.
PD32E	2-30	PD32E has a unique combination of wear resistance, edge strength, and edge quality. It contains a carefully sorted mix of micron diamond(Between 2 - 30 μm). The combination of these particle sizes and a specifically developed high-pressure sintering process produces a structure with extreme abrasion resistance and good thermal stability.	Application areas include the machining of abrasive workpieces such as MMC, and high silicon aluminum alloys as well as the machining of carbide, hard rubber, graphite, and other applications.
CVDD	-	CVDD is a pure carbon material without a binder with extreme abrasion resistance and good thermal suitability. Due to its perfect cutting edge suitable for applications where mirror finishes are required.	Application areas include the machining of abrasive workpieces such as MMC, and high silicon aluminum alloys as well as the machining of carbide, hard rubber, graphite, and other applications.

SPECIFICATIONS

			Grade				ic	φd	s	r	la
ISO catalog number	ANSI catalog number	Tip Shape	PD01E	PD10E	PD32E	CVDD	mm	mm	mm	mm	mm
TPGW080202-1N P00P11	TPGW(1.5)(1.5)(0.5)-1N P00P11	CBCBC125S	●	●	●		4.76	2.4	2.38	0.2	2.5
TPGW080204-1N P00P11	TPGW(1.5)(1.5)1-1N P00P11	CBCBC125S	●	●	●		4.76	2.4	2.38	0.4	2.5
TPGW080202-1N P00P11	TPGW(1.5)(1.5)(0.5)-1N P00P11	SLCBC125S				●	4.76	2.4	2.38	0.2	2.5
TPGW080204-1N P00P11	TPGW(1.5)(1.5)1-1N P00P11	SLCBC125S				●	4.76	2.4	2.38	0.4	2.5
TPGW080202-3N P00P11	TPGW(1.5)(1.5)(0.5)-3N P00P11	CBCBC125S	●	●	●		4.76	2.4	2.38	0.2	2.5
TPGW080204-3N P00P11	TPGW(1.5)(1.5)1-3N P00P11	CBCBC125S	●	●	●		4.76	2.4	2.38	0.4	2.5
TPGW110302-1N P00P11	TPGW22(0.5)-1N P00P11	CBCBC125S	●	●	●		6.35	3.3	3.18	0.2	2.5
TPGW110304-1N P00P11	TPGW22 1-1N P00P11	CBCBC125S	●	●	●		6.35	3.3	3.18	0.4	2.5
TPGW110302-1N P00P11	TPGW22(0.5)-1N P00P11	SLCBC125S				●	6.35	3.3	3.18	0.2	2.5
TPGW110304-1N P00P11	TPGW22 1-1N P00P11	SLCBC125S				●	6.35	3.3	3.18	0.4	2.5
TPGW110302-3N P00P11	TPGW22(0.5)-3N P00P11	CBCBC125S	●	●	●		6.35	3.3	3.18	0.2	2.5
TPGW110304-3N P00P11	TPGW22 1-3N P00P11	CBCBC125S	●	●	●		6.35	3.3	3.18	0.4	2.5
TPGW160402-1N P00P11	TPGW33(0.5)-1N P00P11	CBCBC125S	●	●	●		9.525	4.4	4.76	0.2	2.5
TPGW160404-1N P00P11	TPGW33 1-1N P00P11	CBCBC125S	●	●	●		9.525	4.4	4.76	0.4	2.5
TPGW160408-1N P00P11	TPGW33 2-1N P00P11	CBCBC125S	●	●	●		9.525	4.4	4.76	0.8	2.5
TPGW160402-1N P00P11	TPGW33(0.5)-1N P00P11	SLCBC125S				●	9.525	4.4	4.76	0.2	2.5
TPGW160404-1N P00P11	TPGW33 1-1N P00P11	SLCBC125S				●	9.525	4.4	4.76	0.4	2.5
TPGW160408-1N P00P11	TPGW33 2-1N P00P11	SLCBC125S				●	9.525	4.4	4.76	0.8	2.5
TPGW160402-3N P00P11	TPGW33(0.5)-3N P00P11	CBCBC125S	●	●	●		9.525	4.4	4.76	0.2	2.5
TPGW160404-3N P00P11	TPGW33 1-3N P00P11	CBCBC125S	●	●	●		9.525	4.4	4.76	0.4	2.5
TPGW160408-3N P00P11	TPGW33 2-3N P00P11	CBCBC125S	●	●	●		9.525	4.4	4.76	0.8	2.5

About Us:

			Grade				ic	φd	s	r	la
ISO catalog number	ANSI catalog number	Tip Shape	PD01E	PD10E	PD32E	CVDD	mm	mm	mm	mm	mm
TCGW080202-1N P00P07	TCGW(1.5)(1.5)(0.5)-1N P00P07	CBCBC125S	●	●	●		4.76	2.4	2.38	0.2	2.5
TCGW080204-1N P00P07	TCGW(1.5)(1.5)1-1N P00P07	CBCBC125S	●	●	●		4.76	2.4	2.38	0.4	2.5
TCGW080202-1N P00P07	TCGW(1.5)(1.5)(0.5)-1N P00P07	SLCBC125S				●	4.76	2.4	2.38	0.2	2.5
TCGW080204-1N P00P07	TCGW(1.5)(1.5)1-1N P00P07	SLCBC125S				●	4.76	2.4	2.38	0.4	2.5
TCGW080202-3N P00P07	TCGW(1.5)(1.5)(0.5)-3N P00P07	CBCBC125S	●	●	●		4.76	2.4	2.38	0.2	2.5
TCGW080204-3N P00P07	TCGW(1.5)(1.5)1-3N P00P07	CBCBC125S	●	●	●		4.76	2.4	2.38	0.4	2.5
TCGW110302-1N P00P07	TCGW22(0.5)-1N P00P07	CBCBC125S	●	●	●		6.35	2.8	3.18	0.2	2.5
TCGW110304-1N P00P07	TCGW22 1-1N P00P07	CBCBC125S	●	●	●		6.35	2.8	3.18	0.4	2.5
TCGW110302-1N P00P07	TCGW22(0.5)-1N P00P07	SLCBC125S				●	6.35	2.8	3.18	0.2	2.5
TCGW110304-1N P00P07	TCGW22 1-1N P00P07	SLCBC125S				●	6.35	2.8	3.18	0.4	2.5
TCGW110302-3N P00P07	TCGW22(0.5)-3N P00P07	CBCBC125S	●	●	●		6.35	2.8	3.18	0.2	2.5
TCGW110304-3N P00P07	TCGW22 1-3N P00P07	CBCBC125S	●	●	●		6.35	2.8	3.18	0.4	2.5
TCGW160402-1N P00P07	TCGW33(0.5)-1N P00P07	CBCBC125S	●	●	●		9.525	4.4	4.76	0.2	2.5
TCGW160404-1N P00P07	TCGW33 1-1N P00P07	CBCBC125S	●	●	●		9.525	4.4	4.76	0.4	2.5
TCGW160408-1N P00P07	TCGW33 2-1N P00P07	CBCBC125S	●	●	●		9.525	4.4	4.76	0.8	2.5
TCGW160402-1N P00P07	TCGW33(0.5)-1N P00P07	SLCBC125S				●	9.525	4.4	4.76	0.2	2.5
TCGW160404-1N P00P07	TCGW33 1-1N P00P07	SLCBC125S				●	9.525	4.4	4.76	0.4	2.5
TCGW160408-1N P00P07	TCGW33 2-1N P00P07	SLCBC125S				●	9.525	4.4	4.76	0.8	2.5
TCGW160402-3N P00P07	TCGW33(0.5)-3N P00P07	CBCBC125S	●	●	●		9.525	4.4	4.76	0.2	2.5
TCGW160404-3N P00P07	TCGW33 1-3N P00P07	CBCBC125S	●	●	●		9.525	4.4	4.76	0.4	2.5
TCGW160408-3N P00P07	TCGW33 2-3N P00P07	CBCBC125S	●	●	●		9.525	4.4	4.76	0.8	2.5

Hot Products

Rcmn Round Carbide Insert , Pcd Insert For Aluminum

RCMN round PCD cutting insert blade tool HRA85 for CNC caribe steel rolls turning Round PCD Insert--...

Rcmx Pcd Cutting Inserts , Round Carbide Inserts For Aluminum

RCMX round PCD cutting insert blade tool HRA85 for CNC caribe steel rolls turning Round PCD Insert--...

Rcmn-V Type Round Insert Turning Tool WORLDIA Impact Resistance

RCMN-V round PCD cutting insert blade tool HRA85 for CNC caribe steel rolls turning Round PCD Insert...

Rnga Round Pcd Cutting Inserts Blade Tool Hra85 For Cnc Carbide Steel Rolls Turning

RNGA round PCD cutting insert blade tool HRA85 for CNC caribe steel rolls turning Round PCD Insert--...

Rnga Pcbn Cutting Inserts , Round Carbide Insert Wear Resistance

RNGA round PCBN cutting insert blade tool HRA85 for CNC caribe steel rolls turning Round PCBN Insert...

Rcmx Pcbn Cutting Round Insert Turning Tool For Forged Steel

RCMX round PCBN cutting insert blade tool HRA85 for CNC caribe steel rolls turning Round PCBN Insert...

Related Products