Active Member
|
[China]
Address: No.469, 13th Floor, No.4 Building, No.89 Science Avenue, High -Tech Zone, Zhengzhou, China
Contact name:Nancy Young
Zhengzhou The Right Time Import And Export Co., Ltd. |
|
|
18.5kw Automatic MDF Edge Banding Machine Edgebander With Premilling And Corner Rounding
The main functions of this machine include: pre-milling, gluing (two glue pots, different colors of glue can be used to meet the fast switching work of different colored edgebands), end trimming, rough trimming, fine trimming, edge scraping, profiling Tracking and polishing (two sets of polishing devices, suitable for fast switching of edgebanding tapes of different colors), a set of gluing device and a set of polishing devices are added on the basis of common basic functions, which can meet your requirements for edgebanding of different color materials Work, increase the aesthetics of the edge sealing effect, reduce the time for switching glue, and improve work efficiency.
Features:
The edge banding machine adopts automatic control, and the edge banding operation range is large, which can ensure that the hot melt adhesive does not paste or leak, and is suitable for straight edge banding of various plates. It is suitable for furniture processing, cabinet processing, edge banding of interior decorative panels and many other aspects.
Machine introduction:
1) Rigid design of the body, the overall electrostatic spray
process
2) Electrical components with reliable quality
3) National standard high-quality pneumatic parts, longer service
life and more reliable action
4) Rigid guide rail, more precise and more durable
5) The air pressure protection device can effectively prevent the
malfunction of the starting system
6) Overload protection system, automatic shutdown when the
temperature of the plastic box is too low
7) The transmission system is stable and low noise
| Name | 18.5kw Automatic MDF Edge Banding Machine Edgebander With Premilling And Corner Rounding |
| Model | ZDS-468JJ |
| Working pressure | 0.6Mpa |
| Panel thickness | 10-60mm |
| Edge thickness | 0.4-3mm |
| Min. panel | 300*60mm 150*150mm |
| Voltage | 380V-3HP |
| Power | 18.5kw |
| Weight | 2300kg |
| Dimensions | 8000*900*1600mm |
1. This equipment adopts stepless electronic speed regulation motor
and motor speed controller to realize stepless speed regulation.
The speed regulation is more stable and accurate.
2. The length of the curved surface is set using the current
foreign advanced encoder technology to calculate the length, and
the calculation accuracy is more accurate.
3. The sol heater is composed of two parts:
1) The main heater is responsible for boiling the glue in the glue
pot
2) The heater is responsible for the heat preservation of the glue,
so as to ensure that the glue has better fluidity during
retransmission and gluing, so that the paste is more uniform.
4. Double-sided gluing realizes the gluing of the board and the
edge band at the same time, making the paste more firm.
PLC intelligent control, independent liquid crystal display can see the running process of the machine more clearly and comprehensively, which is convenient, quick and easy to use, real-time monitoring, real-time adjustment, more accurate, high-efficiency production, and the edge sealing effect is not compromised.
Pre-milling, the first process when the sheet enters the conveyor belt, the diamond double milling cutter is used to trim the edge chipping, corrugation and burr phenomenon of the sheet cover again, so as to achieve better edge sealing effect.
The edge-sealing gluing device heats the sol through the gluing pot, and adopts the spiral structure to deliver the glue. The gluing speed is fast, uniform, and the adhesive force is firm.
The end trimming device, through the structure of automatic mold tracking and high-frequency high-speed motor, ensures that the cut surface is smooth and smooth, and has the protection function of flushing the plate to enhance the stability of the flush.
Rough trimming device, the cutter at the rough trimming part is a flat knife, which is used to trim the excess edge sealing material on the upper and lower parts of the edge banding of the processed sheet.
Finishing device, the finishing knife is R2 inclined knife, which can leave 5-6 wire allowance for the next scraping process. The automatic tracking of the mold and the high-frequency motor are used to achieve fast cutting, and the R2 inclined knife is used to repair the radian.
Scraping device, profile scraping, is used to eliminate the secondary wave marks caused by the cutting process of non-linear motion of trimming, so that the upper and lower parts of the plate are more smooth and tidy. better.
The polishing device cleans the processed plate with a cotton polishing wheel, removes excess glue stains, and makes the edge banding section smoother and tidy through polishing.
