|
[China]
Trade Verify
Address: 88 Meters North of Mingshan Village, Fuqian Street, Zaoyuan Street, Zhangqiu District, Jinan City, Shandong Province, China
Contact name:Amy
Shandong Jinzhao Machine Co., Ltd. |
|
Verified Suppliers
|
|
|
GHG Drum Rotary Wood Sawdust Dryer With Cyclone Wood Shavings Dryer Rotary Drum Dryer Introduction:
Working principle: Wet raw material is transported into the dryer by belt conveyor or bucket elevator, because the cylinder is in inclined state for slow rotary movement, so the material in the axial direction from high to low-end movement, in the process of movement, the lifting plate continuously raises, scatters and moves down the material in the cylinder, thus making the material and the high-temperature flue gas carry on the full heat exchange until the drying reaches the specified requirements, the dried material is discharged from the output by discharging device. The waste gas from the dryer end will be discharged by cyclone.
GHG Drum Rotary Wood Sawdust Dryer With Cyclone Wood Shavings Dryer
is combined with heating furnace, input port, rotating cylinder,
delivery pipe, dust collector and output port. Wet materials are
continuously sent to the drying cylinder by a conveyor. Heat air
full contact with the material sucked by fan blower installed in
the end of dryer. Being transported and scattered by the high-speed
hot air, water in the raw material is evaporated and discharged by
cyclone. The material gets fully dried in the rotating cylinder.
The GHG Drum Rotary Wood Sawdust Dryer With Cyclone Wood Shavings Dryer is provided with a circumferential lifting plate combination device at various angles inside the cylinder body, which can greatly increase the heat exchange rate and shorten the drying time, can be widely used in river sand, slime, bauxite, clay, slag, fly ash and other materials drying.
GHG dryer is widely used in industries like biomass fuel, wood
pellet fuel, sawdust briquette, farming etc. The applicable
materials are wood powder, wood shavings, sawdust, wood chips,
straws, grass, etc.
The drying body of industrial rotary dryer is composed of cylinder
body, ring gear and rolling ring. The drying body is on the tug
rolling device and block rolling device supported by front and back
rolling ring. It can control axial direction traversing of drying
body by adjusting tug rolling device and block rolling device. The
driving device drives drying body rotating through the ring gear.
Electric motor (frequent) as the power can achieve stepless speed
adjusting and meet the demand of different rotating speed.
GHG Drum Rotary Wood Sawdust Dryer With Cyclone Wood Shavings Dryer model for reference:
| Model GHG Drum Rotary Wood Sawdust Dryer With Cyclone Wood Shavings Dryer | Power(kw) | Evaporation Capacity(t/h) |
| GHGΦ1.0×12×1 | 4 | 0.1-0.2 |
| GHGΦ1.2×12×1 | 5.5 | 0.2-0.45 |
| GHGΦ1.5×15×1 | 11 | 0.5-0.7 |
| GHGΦ1.6×18×1 | 11 | 0.7-1.1 |
| GHGΦ1.8×20×1 | 15 | 1-1.3 |
| GHGΦ1.8×24×1 | 18.5 | 1.2-1.5 |
| GHGΦ2.0×24×1 | 18.5 | 1.5-2.2 |
| GHGΦ2.2×24×1 | 22 | 1.7-2.5 |
| GHGΦ2.5×24×1 | 22 | 2.5-3.2 |
| GHGΦ2.8×24×1 | 22 | 3-4 |
| GHGΦ3.0×24×1 | 30 | 3.5-4.5 |
| GHGΦ3.5×24×1 | 37 | 4.5-6.5 |
OUR SERVIC for GHG Drum Rotary Wood Sawdust Dryer With Cyclone Wood Shavings
Dryer
Pre-sale service GHG Drum Rotary Wood Sawdust Dryer With Cyclone Wood Shavings Dryer
1. Expertise and experience of our team help each client to select
their most suitable pellet machine.
2. Legal logo printing or design are available.
3. Quality + Good Price + Quick Response + Reliable Service is what
we are doing best to offer you.
After you choose GHG Drum Rotary Wood Sawdust Dryer With Cyclone Wood Shavings
Dryer:
1. Your machine order can be arranged to produce at the first time.
2. Empty loading running test once machine finished production.
3. Every equipment will be checked carefully before packing, take
photos and video to you for confirmation.
4. Shipment booking service is supported.
5. Supervise the whole process of loading.
6. Customs clearance documents will be supplied in time.
After-sale service GHG Drum Rotary Wood Sawdust Dryer With Cyclone Wood Shavings Dryer
1. 24hours on-line service, guide you to install and operate the
machines your ordered.
2. Video communication guide your local workers doing installation,
commissioning and normal maintenance.
3. Engineer technician can be available to your factory to on-site
guide installation, training for biomass pellet machine line and
other big machines.
4. Spare parts and accessories will be supplied with good price and
delivered in 7 working days.
GHG Drum Rotary Wood Sawdust Dryer With Cyclone Wood Shavings
Dryer FAQ
Q. What is your payment term GHG Drum Rotary Wood Sawdust Dryer With Cyclone Wood Shavings
Dryer?
A: T/T 30% down payment, balance to be paid before shipment.
Q: What is your main market GHG Drum Rotary Wood Sawdust Dryer With Cyclone Wood Shavings
Dryer?
A: Eastern Europe, Southeast Asia, Africa, Oceania, Eastern Asia
Q: What is your delivery time GHG Drum Rotary Wood Sawdust Dryer With Cyclone Wood Shavings
Dryer?
A: Unit pellet machine can be done well within 10 working days.
Complete line will be done with 15-50 working days, the specific
time depends on the amount of equipment you purchased.
Q: What documents you can offer GHG Drum Rotary Wood Sawdust Dryer With Cyclone Wood Shavings
Dryer?
A: We can offer invoice, packing list, contract, instructions,
customs declaration, certificate of origin, CE. If client need
other documents, specifications, please confirm with service staff.
Q: If machine have some quality problem, your solutions GHG Drum Rotary Wood Sawdust Dryer With Cyclone Wood Shavings Dryer?
A: If finally confirm our side machine quality problem within
guarantee time, we will responsible for it. Change all the parts
for free.
Wood sawdust dryer delivery
Wood sawdust dryer installation
